[PATCH v5 0/6] Add support for S4 audio

[Rob Herring (Arm)]

On Thu, 10 Jul 2025 11:35:36 +0800, jiebing chen wrote:
> This series completes the end-to-end audio support
> for S4 SoC from hardware bindings to driver implementation
> and system integration.
> 
> 1 Device Tree Bindings Updates
> Added audio power domain support for S4 SoC.Defined mclk/sclk pad clock IDs in AXG audio bindings.
> Add S4 audio tocodec binding support.
> 
> 2 Driver Implementation
> Implemented S4 tocodec driver for G12A architecture.
> Add mclk pad divider support for S4 in AXG audio clock.
> 
> 3 Device Tree Integration
> Add Amlogic S4 audio subsystem support in arm64 DTS.
> 
> Signed-off-by: jiebing chen <jiebing.chen at amlogic.com>
> ---
> Changes in v5:
> - Fix warning Documentation/devicetree/bindings/clock/amlogic,axg-audio-clkc.yam when make dt_binding_check
> - The audio reg is mounted below the APB bus in dts file.
> - Deal with pad clock in a distinct controller.
> - Fix warning for sound/soc/meson/g12a-toacodec.c
> - Link to v4: https://lore.kernel.org/r/20250319-audio_drvier-v4-0-686867fad719@amlogic.com
> 
> Changes in v4:
> - fix dtb check warning
> - add maxItems of power domain for dt-bindings
> - fixed audio clock pads regmap base and reg offset
> - use dapm widget to control tocodec bclk and mclk enable
> - Link to v3: https://lore.kernel.org/r/20250228-audio_drvier-v3-0-dbfd30507e4c@amlogic.com
> 
> Changes in v3:
> - remove g12a tocodec switch event
> - Modify the incorrect title for dt-bindings
> - Link to v2: https://lore.kernel.org/r/20250214-audio_drvier-v2-0-37881fa37c9e@amlogic.com
> 
> Changes in v2:
> - remove tdm pad control and change tocodec base on g12a
> - change hifipll rate to support 24bit
> - add s4 audio clock
> - Link to v1: https://lore.kernel.org/r/20250113-audio_drvier-v1-0-8c14770f38a0@amlogic.com
> 
> ---
> jiebing chen (6):
>       dt-bindings: clock: meson: Add audio power domain for s4 soc
>       dt-bindings: clock: axg-audio: Add mclk and sclk pad clock ids
>       dt-bindings: Asoc: axg-audio: Add s4 audio tocodec
>       ASoC: meson: g12a-toacodec: Add s4 tocodec driver
>       clk: meson: axg-audio: Add the mclk pad div for s4 chip
>       arm64: dts: amlogic: Add Amlogic S4 Audio
> 
>  .../bindings/clock/amlogic,axg-audio-clkc.yaml     |  55 ++-
>  .../bindings/sound/amlogic,g12a-toacodec.yaml      |   1 +
>  .../boot/dts/amlogic/meson-s4-s805x2-aq222.dts     | 218 +++++++++++
>  arch/arm64/boot/dts/amlogic/meson-s4.dtsi          | 387 ++++++++++++++++++
>  drivers/clk/meson/axg-audio.c                      | 435 ++++++++++++++++++++-
>  drivers/clk/meson/axg-audio.h                      |   6 +
>  include/dt-bindings/clock/axg-audio-clkc.h         |  11 +
>  sound/soc/meson/g12a-toacodec.c                    |  42 ++
>  8 files changed, 1152 insertions(+), 3 deletions(-)
> ---
> base-commit: 6ecd20965bdc21b265a0671ccf36d9ad8043f5ab
> change-id: 20250110-audio_drvier-07a5381c494b
> 
> Best regards,
> --
> Jiebing Chen <jiebing.chen at amlogic.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit 6ecd20965bdc21b265a0671ccf36d9ad8043f5ab

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/amlogic/' for 20250710-audio_drvier-v5-0-d4155f1e7464 at amlogic.com:

arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: clock-controller at 330000 (amlogic,s4-audio-clkc): reg: [[0, 3342336, 0, 216], [0, 3346048, 0, 16]] is too long
	from schema $id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml#
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: clock-controller at 330e80 (amlogic,clock-pads-clkc): power-domains: False schema does not allow [[14, 7]]
	from schema $id: http://devicetree.org/schemas/clock/amlogic,axg-audio-clkc.yaml#
arch/arm64/boot/dts/amlogic/meson-s4-s805x2-aq222.dtb: sound (amlogic,axg-sound-card): 'anyOf' conditional failed, one must be fixed:
	'clocks' is a required property
	'#clock-cells' is a required property
	from schema $id: http://devicetree.org/schemas/clock/clock.yaml#