[PATCH 01/13] dt-bindings: soc: amlogic: Add clk-measure related properties

[Krzysztof Kozlowski]

On Fri, Aug 15, 2025 at 04:37:27PM +0800, Chuan Liu wrote:
> Add three properties to clk-measure: 'clkmsr-indices', 'clkmsr-names',
> and 'clkmsr-reg-v2' for describing measurable channels and register
> offsets in DT.
> 
> Signed-off-by: Chuan Liu <chuan.liu at amlogic.com>
> ---
>  .../soc/amlogic/amlogic,meson-gx-clk-measure.yaml  | 54 +++++++++++++++++++++-
>  1 file changed, 53 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> index 39d4637c2d08..1c9d37eef5f0 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-clk-measure.yaml
> @@ -6,7 +6,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
>  title: Amlogic Internal Clock Measurer
>  
> -description:
> +description: |

Why?

>    The Amlogic SoCs contains an IP to measure the internal clocks.
>    The precision is multiple of MHz, useful to debug the clock states.
>  
> @@ -28,15 +28,67 @@ properties:
>    reg:
>      maxItems: 1
>  
> +  clkmsr-indices:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description: |

Why | ?

> +      Supported channel IDs for clk-measure.
> +    minItems: 1
> +    maxItems: 256

Nothing - neither this nor commit msg - explains why you need it and
what this is.

> +
> +  clkmsr-names:
> +    $ref: /schemas/types.yaml#/definitions/string-array
> +    description: |
> +      The channel ID names supported by clk-measure correspond one-to-one with
> +      the IDs specified in 'clkmsr-indices'.
> +
> +      Therefore, the defined 'clkmsr-indices' and 'clkmsr-names' must have
> +      matching counts and maintain strict correspondence.
> +    minItems: 1
> +    maxItems: 256
> +
> +  clkmsr-reg-v2:
> +    type: boolean
> +    description: |
> +      Specify whether the register address offset for clk-measure corresponds
> +      to version V2.

No, compatible defines this.

> +
>  required:
>    - compatible
>    - reg
> +  - clkmsr-indices
> +  - clkmsr-names

That's ABI break. Again, nothing explains it.

Best regards,
Krzysztof