[PATCH 0/3] support for Amlogic SPI Flash Controller IP

[Xianwei Zhao via B4 Relay]

This Flash Controller is derived by adding an SPI path to the original
raw NAND controller. This controller supports two modes: raw mode and
SPI mode. The raw mode has already been implemented in the community
(drivers/mtd/nand/raw/meson_nand.c).
This submission supports the SPI mode.

Add the drivers and bindings corresponding to the SPI Flash Controller.

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
Feng Chen (2):
      spi: dt-bindings: add doc for Amlogic A113L2 SFC
      spi: amlogic: add driver for Amlogic SPI Flash Controller

Xianwei Zhao (1):
      MAINTAINERS: Add an entry for Amlogic spifc driver

 .../devicetree/bindings/spi/amlogic,a4-spifc.yaml  |  104 ++
 MAINTAINERS                                        |   10 +
 drivers/spi/Kconfig                                |   10 +
 drivers/spi/Makefile                               |    1 +
 drivers/spi/spi-amlogic-spifc-a4.c                 | 1328 ++++++++++++++++++++
 5 files changed, 1453 insertions(+)
---
base-commit: 60fcf916e06250108143a993bd803c6b12ad8d02
change-id: 20250804-spifc-5761e35fbe1f

Best regards,
-- 
Xianwei Zhao <xianwei.zhao at amlogic.com>