[PATCH v2 2/2] PCI: Remove redundant MPS configuration
Hans Zhang
18255117159 at 163.com
Fri Apr 25 07:20:30 PDT 2025
On 2025/4/25 19:59, neil.armstrong at linaro.org wrote:
> On 25/04/2025 11:57, Hans Zhang wrote:
>> With the PCI core now centrally configuring root port MPS to
>> hardware-supported maximums (via 128 << pcie_mpss) during host probing,
>> platform-specific MPS adjustments are redundant. This patch removes the
>> custom the configuration of the max payload logic to align with the
>> standardized initialization flow.
>>
>> By eliminating redundant code, this change prevents conflicts with global
>> PCIe hierarchy tuning policies and reduces maintenance overhead. The
>> Meson
>> driver now fully relies on the core PCI framework for MPS configuration,
>> ensuring consistency across the PCIe topology while preserving
>> hardware-specific MRRS handling.
>>
>> Signed-off-by: Hans Zhang <18255117159 at 163.com>
>> ---
>> drivers/pci/controller/dwc/pci-meson.c | 17 -----------------
>> drivers/pci/controller/pci-aardvark.c | 2 --
>> 2 files changed, 19 deletions(-)
>>
>> diff --git a/drivers/pci/controller/dwc/pci-meson.c
>> b/drivers/pci/controller/dwc/pci-meson.c
>> index db9482a113e9..126f38ed453d 100644
>> --- a/drivers/pci/controller/dwc/pci-meson.c
>> +++ b/drivers/pci/controller/dwc/pci-meson.c
>> @@ -261,22 +261,6 @@ static int meson_size_to_payload(struct
>> meson_pcie *mp, int size)
>> return fls(size) - 8;
>> }
>> -static void meson_set_max_payload(struct meson_pcie *mp, int size)
>> -{
>> - struct dw_pcie *pci = &mp->pci;
>> - u32 val;
>> - u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>> - int max_payload_size = meson_size_to_payload(mp, size);
>> -
>> - val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
>> - val &= ~PCI_EXP_DEVCTL_PAYLOAD;
>> - dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
>> -
>> - val = dw_pcie_readl_dbi(pci, offset + PCI_EXP_DEVCTL);
>> - val |= PCIE_CAP_MAX_PAYLOAD_SIZE(max_payload_size);
>> - dw_pcie_writel_dbi(pci, offset + PCI_EXP_DEVCTL, val);
>> -}
>> -
>> static void meson_set_max_rd_req_size(struct meson_pcie *mp, int size)
>> {
>> struct dw_pcie *pci = &mp->pci;
>> @@ -381,7 +365,6 @@ static int meson_pcie_host_init(struct dw_pcie_rp
>> *pp)
>> pp->bridge->ops = &meson_pci_ops;
>> - meson_set_max_payload(mp, MAX_PAYLOAD_SIZE);
>> meson_set_max_rd_req_size(mp, MAX_READ_REQ_SIZE);
>
> Seems you can also remove meson_set_max_rd_req_size() since it's
> done by pcie_write_mrrs()
Dear neil,
Thank you very much for your reply and reminder.
I want to wait for the result of the first patch discussion, and then
see if we need to remove meson_set_max_rd_req_size().
Best regards,
Hans
More information about the linux-amlogic
mailing list