[PATCH v1 0/4] dts: amlogic: fix FCLK{3,4} clocks for new PWM controller binding

[neil.armstrong at linaro.org]

On 20/04/2025 18:47, Martin Blumenstingl wrote:
> Christian has reported Bluetooth issues on some of his boards, for
> example on a (GXBB) WeTek Play 2:
>    # dmesg | grep -i blue
>    Bluetooth: Core ver 2.22
>    NET: Registered PF_BLUETOOTH protocol family
>    Bluetooth: HCI device and connection manager initialized
>    Bluetooth: HCI socket layer initialized
>    Bluetooth: L2CAP socket layer initialized
>    Bluetooth: SCO socket layer initialized
>    Bluetooth: HCI UART driver ver 2.3
>    Bluetooth: HCI UART protocol H4 registered
>    Bluetooth: HCI UART protocol Three-wire (H5) registered
>    Bluetooth: HCI UART protocol Broadcom registered
>    Bluetooth: HCI UART protocol QCA registered
>    Bluetooth: HCI UART protocol AML registered
>    Bluetooth: null: hu 0000000023fa9791
>    Bluetooth: hci0: hu 0000000023fa9791
>    Bluetooth: hci0: hu 0000000023fa9791 skb 000000003f7acf2f
>    Bluetooth: hci0: command 0x0c03 tx timeout
>    Bluetooth: hci0: BCM: Reset failed (-110)
>    Bluetooth: hci0: hu 0000000023fa9791
>    Bluetooth: hci0: hu 0000000023fa9791
> 
> It turns out there's a typo in the references to the untested/unknown
> clock input that made it into the already applied series
> "dts: amlogic: switch to the new PWM controller binding" [0]
> 
> The original goal was to skip this input. This can be achieved by
> specifying a clock input as <0> (which this series does). When using
> <> (note the lack of 0) the clock is completely ignored when parsing
> the .dtb, resulting in a shift in index of the FCLK DIV4 / DIV3 inputs.
> This then results in the PWM controller driver calculating the
> frequencies for a different clock compared to what the actual hardware
> uses.
> 
> Neil, please apply this as a fix for the next 6.15-rc.
> 
> 
> [0] https://lore.kernel.org/linux-amlogic/20241227212514.1376682-1-martin.blumenstingl@googlemail.com/
> 
> 
> Martin Blumenstingl (4):
>    ARM: dts: amlogic: meson8: fix reference to unknown/untested PWM clock
>    ARM: dts: amlogic: meson8b: fix reference to unknown/untested PWM
>      clock
>    arm64: dts: amlogic: gx: fix reference to unknown/untested PWM clock
>    arm64: dts: amlogic: g12: fix reference to unknown/untested PWM clock
> 
>   arch/arm/boot/dts/amlogic/meson8.dtsi             | 6 +++---
>   arch/arm/boot/dts/amlogic/meson8b.dtsi            | 6 +++---
>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 +++---
>   arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi       | 6 +++---
>   arch/arm64/boot/dts/amlogic/meson-gxl.dtsi        | 6 +++---
>   5 files changed, 15 insertions(+), 15 deletions(-)
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>