[PATCH 07/10] pinctrl: sx150x: enable building modules with COMPILE_TEST=y

[Nathan Chancellor]

Hi Bartosz,

On Tue, Apr 08, 2025 at 09:17:44AM +0200, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> 
> Increase the build coverage by enabling the sx150x modules with
> COMPILE_TEST=y.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
> ---
>  drivers/pinctrl/Kconfig | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 464cc9aca157..94eb41bb9cf2 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -541,7 +541,7 @@ config PINCTRL_STMFX
>  
>  config PINCTRL_SX150X
>  	bool "Semtech SX150x I2C GPIO expander pinctrl driver"
> -	depends on I2C=y
> +	depends on I2C=y || COMPILE_TEST
>  	select PINMUX
>  	select PINCONF
>  	select GENERIC_PINCONF
> 
> -- 
> 2.45.2
> 

This appears to break allmodconfig with

  ld.lld: error: undefined symbol: i2c_get_match_data
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_probe) in archive vmlinux.a

  ld.lld: error: undefined symbol: i2c_smbus_write_byte_data
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_probe) in archive vmlinux.a
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_probe) in archive vmlinux.a
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_regmap_reg_write) in archive vmlinux.a

  ld.lld: error: undefined symbol: i2c_smbus_read_byte_data
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_regmap_reg_read) in archive vmlinux.a

  ld.lld: error: undefined symbol: i2c_register_driver
  >>> referenced by pinctrl-sx150x.c
  >>>               drivers/pinctrl/pinctrl-sx150x.o:(sx150x_init) in archive vmlinux.a
  make[4]: *** [scripts/Makefile.vmlinux:91: vmlinux] Error 1

I don't think this change makes much sense in light of this error,
unless the driver was converted to tristate.

Cheers,
Nathan