[PATCH v2 6/7] arm64: dts: amlogic: C3: Add clk-measure controller node

[Neil Armstrong]

On 14/04/2025 12:12, Chuan Liu via B4 Relay wrote:
> From: Chuan Liu <chuan.liu at amlogic.com>
> 
> Add the clk-measure controller node for C3 SoC family.
> 
> Signed-off-by: Chuan Liu <chuan.liu at amlogic.com>
> ---
>   arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 5 +++++
>   1 file changed, 5 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> index fd0e557eba06..cb9ea3ca6ee0 100644
> --- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
> @@ -760,6 +760,11 @@ internal_ephy: ethernet_phy at 8 {
>   				};
>   			};
>   
> +			clk_msr: clock-measure at 48000 {
> +				compatible = "amlogic,c3-clk-measure";
> +				reg = <0x0 0x48000 0x0 0x1c>;
> +			};
> +
>   			spicc0: spi at 50000 {
>   				compatible = "amlogic,meson-g12a-spicc";
>   				reg = <0x0 0x50000 0x0 0x44>;
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>