[PATCH v2 1/3] clk: meson: Support PLL with fixed fractional denominators

Jerome Brunet jbrunet at baylibre.com
Fri Sep 6 04:22:57 PDT 2024


On Fri 06 Sep 2024 at 18:34, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com at kernel.org> wrote:

> From: Chuan Liu <chuan.liu at amlogic.com>
>
> Some PLLS with fractional multipliers have fractional denominators with
> fixed values, instead of the previous "(1 << pll-> frc.width)".
>
> Signed-off-by: Chuan Liu <chuan.liu at amlogic.com>
> ---
>  drivers/clk/meson/clk-pll.c | 8 +++++---
>  drivers/clk/meson/clk-pll.h | 1 +
>  2 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
> index bc570a2ff3a3..a141ab450009 100644
> --- a/drivers/clk/meson/clk-pll.c
> +++ b/drivers/clk/meson/clk-pll.c
> @@ -57,12 +57,13 @@ static unsigned long __pll_params_to_rate(unsigned long parent_rate,
>  					  struct meson_clk_pll_data *pll)
>  {
>  	u64 rate = (u64)parent_rate * m;
> +	unsigned int frac_max = unlikely(pll->frac_max) ? pll->frac_max
> :
                                 ^ Please don't play with this unless
                                 you've got justification a for it.

By justification, I mean actual numbers showing the difference it makes
and not just for the platforms listed in this series, but all the
platforms supported by this driver.

> +							  (1 << pll->frac.width);
>  
>  	if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
>  		u64 frac_rate = (u64)parent_rate * frac;
>  
> -		rate += DIV_ROUND_UP_ULL(frac_rate,
> -					 (1 << pll->frac.width));
> +		rate += DIV_ROUND_UP_ULL(frac_rate, frac_max);
>  	}
>  
>  	return DIV_ROUND_UP_ULL(rate, n);
> @@ -100,7 +101,8 @@ static unsigned int __pll_params_with_frac(unsigned long rate,
>  					   unsigned int n,
>  					   struct meson_clk_pll_data *pll)
>  {
> -	unsigned int frac_max = (1 << pll->frac.width);
> +	unsigned int frac_max = unlikely(pll->frac_max) ? pll->frac_max :
> +							  (1 << pll->frac.width);
>  	u64 val = (u64)rate * n;
>  
>  	/* Bail out if we are already over the requested rate */
> diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
> index 7b6b87274073..949157fb7bf5 100644
> --- a/drivers/clk/meson/clk-pll.h
> +++ b/drivers/clk/meson/clk-pll.h
> @@ -43,6 +43,7 @@ struct meson_clk_pll_data {
>  	unsigned int init_count;
>  	const struct pll_params_table *table;
>  	const struct pll_mult_range *range;
> +	unsigned int frac_max;
>  	u8 flags;
>  };

-- 
Jerome



More information about the linux-amlogic mailing list