[PATCH v10 20/22] arm64: dts: amlogic: s4: add crypto node

[Alexey Romanov]

This patch adds a crypto node declaration for Amlogic S4-series.
With the Amlogic crypto driver we can use HW implementation
of SHA1/224/256 and AES algo.

Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
---
 arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
index 957577d986c0..39a226d75a3d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-s4.dtsi
@@ -95,6 +95,12 @@ gic: interrupt-controller at fff01000 {
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
+		clk81: clk81 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <166000000>;
+		};
+
 		apb4: bus at fe000000 {
 			compatible = "simple-bus";
 			reg = <0x0 0xfe000000 0x0 0x480000>;
@@ -586,6 +592,13 @@ mux {
 
 			};
 
+			crypto: crypto at 440400 {
+				compatible = "amlogic,s4-crypto", "amlogic,a1-crypto";
+				reg = <0x0 0x440400 0x0 0x48>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clk81>;
+			};
+
 			gpio_intc: interrupt-controller at 4080 {
 				compatible = "amlogic,meson-s4-gpio-intc",
 					     "amlogic,meson-gpio-intc";
-- 
2.34.1