[PATCH v2 2/4] pwm: meson: Support constant and polarity bits

Uwe Kleine-König u.kleine-koenig at baylibre.com
Thu Nov 7 00:41:34 PST 2024


On Wed, Nov 06, 2024 at 04:54:41PM +0300, George Stark wrote:
> On 11/4/24 12:32, Uwe Kleine-König wrote:
> > > @@ -68,6 +72,8 @@ static struct meson_pwm_channel_data {
> > >   	u8		clk_div_shift;
> > >   	u8		clk_en_shift;
> > >   	u32		pwm_en_mask;
> > > +	u32		const_en_mask;
> > > +	u32		inv_en_mask;
> > >   } meson_pwm_per_channel_data[MESON_NUM_PWMS] = {
> > >   	{
> > >   		.reg_offset	= REG_PWM_A,
> > > @@ -75,6 +81,8 @@ static struct meson_pwm_channel_data {
> > >   		.clk_div_shift	= MISC_A_CLK_DIV_SHIFT,
> > >   		.clk_en_shift	= MISC_A_CLK_EN_SHIFT,
> > >   		.pwm_en_mask	= MISC_A_EN,
> > > +		.const_en_mask	= MISC_A_CONSTANT_EN,
> > > +		.inv_en_mask	= MISC_A_INVERT_EN,
> > >   	},
> > >   	{
> > >   		.reg_offset	= REG_PWM_B,
> > > @@ -82,6 +90,8 @@ static struct meson_pwm_channel_data {
> > >   		.clk_div_shift	= MISC_B_CLK_DIV_SHIFT,
> > >   		.clk_en_shift	= MISC_B_CLK_EN_SHIFT,
> > >   		.pwm_en_mask	= MISC_B_EN,
> > > +		.const_en_mask	= MISC_B_CONSTANT_EN,
> > > +		.inv_en_mask	= MISC_B_INVERT_EN,
> > >   	}
> > >   };
> > 
> > So the generic register description describes the const and invert bits,
> > but it doesn't apply to all IPs. Thinking about that, I wonder why this
> > struct exists at all. I would have done this as follows:
> > 
> > 	#define MESON_PWM_REG_PWM(chan)		(0 + 4 * (chan))
> > 
> > 	#define MESON_PWM_REG_MISC		(8)
> > 	#define MESON_PWM_REG_MISC_EN(chan)		BIT(chan)
> > 	#define MESON_PWM_REG_MISC_CLK_SEL(chan)	GENMASK(5 + 2 * (chan), 4 + 2 * (chan))
> > 	....
> > 
> > and then use these constants directly (with pwm->hwpwm as parameter if
> > needed) in the code. I would expect this to result in more efficient and
> > smaller code.
> 
> I've been looking into this driver for more than a year and got used to
> it so much so never thought about changing the foundations :) Although it's
> an interesting thought.
> 
> 1. I took meson_pwm_enable() without
> const patches and reimplemented it using only defines (e.g. w/o local
> var channel_data) and objdumped current and new versions. New version
> turned out to be one instruction longer (arm64, gcc, default -O2). So total
> difference in executable code may be not that significant although
> we can win in C-code line count.

Oh, I indeed would have expected a slight advantage size-wise. Maybe the
compiler already optimizes out the meson_pwm_per_channel_data variable.

> 2. Things like
> #define MISC_B_EN		BIT(1)
> #define MISC_A_EN		BIT(0)
> is more straightforward and can be matched to the datasheet easier
> comparing to (a + b * (chan)) things.

In my (subjective) view that comparison isn't hard with the
parametrised definition.

> So I'm not sure either.
> 
> > > @@ -227,6 +252,15 @@ static void meson_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> > >   	value = readl(meson->base + REG_MISC_AB);
> > >   	value |= channel_data->pwm_en_mask;
> > > +
> > > +	if (meson->data->has_constant)
> > > +		meson_pwm_assign_bit(&value, channel_data->const_en_mask,
> > > +				     channel->constant);
> > 
> > Personally I'd prefer:
> > 
> > 	value &= ~MESON_PWM_REG_MISC_CONST_EN(pwm->hwpwm);
> > 	if (meson->data->has_constant && channel->constant)
> > 		value |= MESON_PWM_REG_MISC_CONST_EN(pwm->hwpwm);
> > 
> > even though your variant only mentions the mask once. While it has this
> > repetition, it's clear what happens without having to know what
> > meson_pwm_assign_bit() does. Maybe that's subjective?
> 
> Actually I also don't like meson_pwm_assign_bit() too match and I'm
> surprised there's no something like this in the kernel already.
> I again objdumped versions meson_pwm_assign_bit() vs double mask repetition.
> Unconditional bit clearing takes only a single instruction:
> 
> // value &= ~channel_data->const_en_mask;
> 9ac:	0a250040 	bic	w0, w2, w5
> 
> So in the current series I could drop meson_pwm_assign_bit() and use:
> 
> value &= ~channel_data->const_en_mask;
> if (meson->data->has_constant && channel->constant)
> 	value |= channel_data->const_en_mask;
> 
> If it's decided now or later to drop meson_pwm_channel_data then
> w\o meson_pwm_assign_bit() future patch will be line-to-line change.
> 
> What you think?

Sounds sensible.

Best regards
Uwe
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20241107/3e2058fd/attachment.sig>


More information about the linux-amlogic mailing list