[RFC PATCH 0/9] reset: amlogic: move reset drivers out of CCF

[Jerome Brunet]

This RFC follows the discussion about having reset driver in the clock tree
[1]. Ideally those should reside in the reset part of tree.

Also the code of the amlogic reset driver is very similar between the 2 trees
and could use the same driver code.

This RFC moves the reset driver of audio clock controller of the g12 and
sm1 SoC family to the reset tree, using the auxiliary bus.

The infrastructure put in place is meant to be generic enough so we may
eventually also move the reset drivers in the meson8b and aoclk clock
controllers.

[1] https://lore.kernel.org/linux-clk/e3a85852b911fdf16dd9ae158f42b3ef.sboyd@kernel.org

Jerome Brunet (9):
  reset: amlogic: convert driver to regmap
  reset: amlogic: add driver parameters
  reset: amlogic: split the device and platform probe
  reset: amlogic: use reset number instead of register count
  reset: amlogic: add reset status support
  reset: amlogic: add toggle reset support
  reset: amlogic: add auxiliary reset driver support
  clk: meson: add auxiliary reset helper driver
  clk: amlogic: axg-audio: use the auxiliary reset driver

 drivers/clk/meson/Kconfig                     |   6 +
 drivers/clk/meson/Makefile                    |   1 +
 drivers/clk/meson/axg-audio.c                 | 108 +--------
 drivers/clk/meson/meson-clk-rst-aux.c         |  84 +++++++
 drivers/clk/meson/meson-clk-rst-aux.h         |  14 ++
 drivers/reset/Kconfig                         |   1 +
 drivers/reset/reset-meson.c                   | 210 ++++++++++++++----
 include/soc/amlogic/meson8b-auxiliary-reset.h |  17 ++
 8 files changed, 293 insertions(+), 148 deletions(-)
 create mode 100644 drivers/clk/meson/meson-clk-rst-aux.c
 create mode 100644 drivers/clk/meson/meson-clk-rst-aux.h
 create mode 100644 include/soc/amlogic/meson8b-auxiliary-reset.h

-- 
2.43.0