[PATCH v3 3/7] clk: meson: a1: pll: support 'syspll' general-purpose PLL for CPU clock

[Dmitry Rokosov]

The 'syspll' PLL, also known as the system PLL, is a general and
essential PLL responsible for generating the CPU clock frequency.
With its wide-ranging capabilities, it is designed to accommodate
frequencies within the range of 768MHz to 1536MHz.

Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
---
 drivers/clk/meson/a1-pll.c | 72 ++++++++++++++++++++++++++++++++++++++
 drivers/clk/meson/a1-pll.h |  6 ++++
 2 files changed, 78 insertions(+)

diff --git a/drivers/clk/meson/a1-pll.c b/drivers/clk/meson/a1-pll.c
index 60b2e53e7e51..286e83199d17 100644
--- a/drivers/clk/meson/a1-pll.c
+++ b/drivers/clk/meson/a1-pll.c
@@ -138,6 +138,76 @@ static struct clk_regmap hifi_pll = {
 	},
 };
 
+static const struct pll_mult_range sys_pll_mult_range = {
+	.min = 32,
+	.max = 64,
+};
+
+static const struct reg_sequence sys_pll_init_regs[] = {
+	{ .reg = ANACTRL_SYSPLL_CTRL1, .def = 0x01800000 },
+	{ .reg = ANACTRL_SYSPLL_CTRL2, .def = 0x00001100 },
+	{ .reg = ANACTRL_SYSPLL_CTRL3, .def = 0x10022300 },
+	{ .reg = ANACTRL_SYSPLL_CTRL4, .def = 0x00300000 },
+	{ .reg = ANACTRL_SYSPLL_CTRL0, .def = 0x01f18432 },
+};
+
+static struct clk_regmap sys_pll = {
+	.data = &(struct meson_clk_pll_data){
+		.en = {
+			.reg_off = ANACTRL_SYSPLL_CTRL0,
+			.shift   = 28,
+			.width   = 1,
+		},
+		.m = {
+			.reg_off = ANACTRL_SYSPLL_CTRL0,
+			.shift   = 0,
+			.width   = 8,
+		},
+		.n = {
+			.reg_off = ANACTRL_SYSPLL_CTRL0,
+			.shift   = 10,
+			.width   = 5,
+		},
+		.frac = {
+			.reg_off = ANACTRL_SYSPLL_CTRL1,
+			.shift   = 0,
+			.width   = 19,
+		},
+		.l = {
+			.reg_off = ANACTRL_SYSPLL_STS,
+			.shift   = 31,
+			.width   = 1,
+		},
+		.current_en = {
+			.reg_off = ANACTRL_SYSPLL_CTRL0,
+			.shift   = 26,
+			.width   = 1,
+		},
+		.l_detect = {
+			.reg_off = ANACTRL_SYSPLL_CTRL2,
+			.shift   = 6,
+			.width   = 1,
+		},
+		.range = &sys_pll_mult_range,
+		.init_regs = sys_pll_init_regs,
+		.init_count = ARRAY_SIZE(sys_pll_init_regs),
+		/*
+		 * The sys_pll clock is usually enabled and initialized in the
+		 * bootloader stage. Additionally, the cpu_clk is connected to
+		 * sys_pll. As a result, it is not allowed to initialize the
+		 * cpu_clk again, as doing so would prevent the CPU from
+		 * executing any instructions.
+		 */
+		.flags = CLK_MESON_PLL_NOINIT_ENABLED,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "sys_pll",
+		.ops = &meson_clk_pll_ops,
+		.parent_names = (const char *[]){ "syspll_in" },
+		.num_parents = 1,
+	},
+};
+
 static struct clk_fixed_factor fclk_div2_div = {
 	.mult = 1,
 	.div = 2,
@@ -283,6 +353,7 @@ static struct clk_hw *a1_pll_hw_clks[] = {
 	[CLKID_FCLK_DIV5]	= &fclk_div5.hw,
 	[CLKID_FCLK_DIV7]	= &fclk_div7.hw,
 	[CLKID_HIFI_PLL]	= &hifi_pll.hw,
+	[CLKID_SYS_PLL]		= &sys_pll.hw,
 };
 
 static struct clk_regmap *const a1_pll_regmaps[] = {
@@ -293,6 +364,7 @@ static struct clk_regmap *const a1_pll_regmaps[] = {
 	&fclk_div5,
 	&fclk_div7,
 	&hifi_pll,
+	&sys_pll,
 };
 
 static struct regmap_config a1_pll_regmap_cfg = {
diff --git a/drivers/clk/meson/a1-pll.h b/drivers/clk/meson/a1-pll.h
index 4be17b2bf383..666d9b2137e9 100644
--- a/drivers/clk/meson/a1-pll.h
+++ b/drivers/clk/meson/a1-pll.h
@@ -18,6 +18,12 @@
 #define ANACTRL_FIXPLL_CTRL0	0x0
 #define ANACTRL_FIXPLL_CTRL1	0x4
 #define ANACTRL_FIXPLL_STS	0x14
+#define ANACTRL_SYSPLL_CTRL0	0x80
+#define ANACTRL_SYSPLL_CTRL1	0x84
+#define ANACTRL_SYSPLL_CTRL2	0x88
+#define ANACTRL_SYSPLL_CTRL3	0x8c
+#define ANACTRL_SYSPLL_CTRL4	0x90
+#define ANACTRL_SYSPLL_STS	0x94
 #define ANACTRL_HIFIPLL_CTRL0	0xc0
 #define ANACTRL_HIFIPLL_CTRL1	0xc4
 #define ANACTRL_HIFIPLL_CTRL2	0xc8
-- 
2.43.0