[PATCH v2 1/7] clk: meson: introduce 'INIT_ONCE' flag to eliminate init for enabled PLL
Dmitry Rokosov
ddrokosov at salutedevices.com
Fri May 10 02:08:53 PDT 2024
When dealing with certain PLLs, it is necessary to avoid modifying them
if they have already been initialized by lower levels. For instance, in
the A1 SoC Family, the sys_pll is enabled as the parent for the cpuclk,
and it cannot be disabled during the initialization sequence. Therefore,
initialization phase must be skipped.
Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
---
drivers/clk/meson/clk-pll.c | 37 +++++++++++++++++++++----------------
drivers/clk/meson/clk-pll.h | 1 +
2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 78d17b2415af..47b22a6be2e4 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -289,11 +289,32 @@ static int meson_clk_pll_wait_lock(struct clk_hw *hw)
return -ETIMEDOUT;
}
+static int meson_clk_pll_is_enabled(struct clk_hw *hw)
+{
+ struct clk_regmap *clk = to_clk_regmap(hw);
+ struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+
+ if (MESON_PARM_APPLICABLE(&pll->rst) &&
+ meson_parm_read(clk->map, &pll->rst))
+ return 0;
+
+ if (!meson_parm_read(clk->map, &pll->en) ||
+ !meson_parm_read(clk->map, &pll->l))
+ return 0;
+
+ return 1;
+}
+
static int meson_clk_pll_init(struct clk_hw *hw)
{
struct clk_regmap *clk = to_clk_regmap(hw);
struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
+ /* Do not init already enabled PLL which marked with 'init_once' */
+ if ((pll->flags & CLK_MESON_PLL_INIT_ONCE) &&
+ meson_clk_pll_is_enabled(hw))
+ return 0;
+
if (pll->init_count) {
if (MESON_PARM_APPLICABLE(&pll->rst))
meson_parm_write(clk->map, &pll->rst, 1);
@@ -308,22 +329,6 @@ static int meson_clk_pll_init(struct clk_hw *hw)
return 0;
}
-static int meson_clk_pll_is_enabled(struct clk_hw *hw)
-{
- struct clk_regmap *clk = to_clk_regmap(hw);
- struct meson_clk_pll_data *pll = meson_clk_pll_data(clk);
-
- if (MESON_PARM_APPLICABLE(&pll->rst) &&
- meson_parm_read(clk->map, &pll->rst))
- return 0;
-
- if (!meson_parm_read(clk->map, &pll->en) ||
- !meson_parm_read(clk->map, &pll->l))
- return 0;
-
- return 1;
-}
-
static int meson_clk_pcie_pll_enable(struct clk_hw *hw)
{
int retries = 10;
diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
index a2228c0fdce5..23195ea4eae1 100644
--- a/drivers/clk/meson/clk-pll.h
+++ b/drivers/clk/meson/clk-pll.h
@@ -28,6 +28,7 @@ struct pll_mult_range {
}
#define CLK_MESON_PLL_ROUND_CLOSEST BIT(0)
+#define CLK_MESON_PLL_INIT_ONCE BIT(1)
struct meson_clk_pll_data {
struct parm en;
--
2.43.0
More information about the linux-amlogic
mailing list