[PATCH v5 1/2] dt-bindings: mtd: amlogic,meson-nand: support fields for boot ROM code
Miquel Raynal
miquel.raynal at bootlin.com
Mon May 6 06:48:58 PDT 2024
Hi Arseniy,
avkrasnov at salutedevices.com wrote on Tue, 16 Apr 2024 11:51:00 +0300:
> Boot ROM code on Meson requires that some pages on NAND must be written
> in special mode: "short" ECC mode where each block is 384 bytes and
> scrambling mode is on.
Ok
> Such pages located with the specified interval within specified offset.
I'm sorry I don't get that sentence.
> Both interval and offset are located in the
> device tree and used by driver if 'nand-is-boot-medium' is set for
> NAND chip.
This sentence is probably not needed.
>
> Signed-off-by: Arseniy Krasnov <avkrasnov at salutedevices.com>
> ---
> .../bindings/mtd/amlogic,meson-nand.yaml | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> index 57b6957c8415..67b2f7c1259c 100644
> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> @@ -64,11 +64,25 @@ patternProperties:
> items:
> maximum: 0
>
> + amlogic,boot-pages:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Number of pages starting from 0, where special ECC
from *offset* 0 I guess?
> + algorithm will be used by the driver.
"where a special ECC configuration must be used because it is accessed
by the ROM code"? Maybe you can even detail what are these values if
they are fixed.
You should probably inform that scrambling shall be on as well.
> +
> + amlogic,boot-page-step:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description:
> + Interval between pages, read/written by the driver with
> + special ECC algorithm.
I'm not sure I fully get the description. What is the unit here? can
you draw a small ascii-art diagram?
> +
> unevaluatedProperties: false
>
> dependencies:
> nand-ecc-strength: [nand-ecc-step-size]
> nand-ecc-step-size: [nand-ecc-strength]
> + amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
> + amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
>
>
> required:
Thanks,
Miquèl
More information about the linux-amlogic
mailing list