[RFC PATCH v2 3/5] dt-bindings: clock: meson: document A1 SoC audio clock controller driver

Jan Dakinevich jan.dakinevich at salutedevices.com
Sat Mar 30 12:42:00 PDT 2024



On 3/29/24 15:24, Jerome Brunet wrote:
> 
> On Thu 28 Mar 2024 at 04:08, Jan Dakinevich <jan.dakinevich at salutedevices.com> wrote:
> 
>> Add device tree bindings for A1 SoC audio clock and reset controllers.
>>
>> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> ---
>>  .../bindings/clock/amlogic,a1-audio-clkc.yaml | 141 ++++++++++++++++++
>>  .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 +++++++++++++++
>>  .../reset/amlogic,meson-a1-audio-reset.h      |  29 ++++
>>  3 files changed, 292 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>>  create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>>  create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>> new file mode 100644
>> index 000000000000..1c9ef3292f3c
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>> @@ -0,0 +1,141 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/amlogic,a1-audio-clkc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Amlogic A1 Audio Clock Control Unit and Reset Controller
>> +
>> +maintainers:
>> +  - Neil Armstrong <neil.armstrong at linaro.org>
>> +  - Jerome Brunet <jbrunet at baylibre.com>
>> +  - Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> +
>> +properties:
>> +  compatible:
>> +    enum:
>> +      - amlogic,a1-audio-clkc
>> +      - amlogic,a1-audio2-clkc
>> +
>> +  '#clock-cells':
>> +    const: 1
>> +
>> +  '#reset-cells':
>> +    const: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    minItems: 6
>> +    maxItems: 7
>> +
>> +  clock-names:
>> +    minItems: 6
>> +    maxItems: 7
>> +
>> +required:
>> +  - compatible
>> +  - '#clock-cells'
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            enum:
>> +              - amlogic,a1-audio-clkc
>> +    then:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: input core clock
>> +            - description: input main peripheral bus clock
>> +            - description: input dds_in
>> +            - description: input fixed pll div2
>> +            - description: input fixed pll div3
>> +            - description: input hifi_pll
>> +            - description: input oscillator (usually at 24MHz)
>> +        clocks-names:
>> +          items:
>> +            - const: core
>> +            - const: pclk
>> +            - const: dds_in
>> +            - const: fclk_div2
>> +            - const: fclk_div3
>> +            - const: hifi_pll
>> +            - const: xtal
>> +      required:
>> +        - '#reset-cells'
>> +    else:
>> +      properties:
>> +        clocks:
>> +          items:
>> +            - description: input main peripheral bus clock
>> +            - description: input dds_in
>> +            - description: input fixed pll div2
>> +            - description: input fixed pll div3
>> +            - description: input hifi_pll
>> +            - description: input oscillator (usually at 24MHz)
>> +        clock-names:
>> +          items:
>> +            - const: pclk
>> +            - const: dds_in
>> +            - const: fclk_div2
>> +            - const: fclk_div3
>> +            - const: hifi_pll
>> +            - const: xtal
> 
> All the optional slave clock inputs are missing from this dcoumentation..
> They need to be documentated as well
> 
Hmmm... here should be a list of 26 entries. First 6 of them are
mandatory, other are optional.

I have no ideas left on how to describe it in yaml, also I can't find
something similar beside existing schemas... Maybe you can give some advice.

>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/amlogic,a1-pll-clkc.h>
>> +    #include <dt-bindings/clock/amlogic,a1-peripherals-clkc.h>
>> +    #include <dt-bindings/clock/amlogic,a1-audio-clkc.h>
>> +    audio {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        clkc_audio: audio-clock-controller at fe050000 {
>> +                compatible = "amlogic,a1-audio-clkc";
>> +                reg = <0x0 0xfe050000 0x0 0xb0>;
>> +                #clock-cells = <1>;
>> +                #reset-cells = <1>;
>> +                clocks = <&clkc_audio2 AUD2_CLKID_AUDIOTOP>,
>> +                         <&clkc_periphs CLKID_AUDIO>,
>> +                         <&clkc_periphs CLKID_DDS_IN>,
>> +                         <&clkc_pll CLKID_FCLK_DIV2>,
>> +                         <&clkc_pll CLKID_FCLK_DIV3>,
>> +                         <&clkc_pll CLKID_HIFI_PLL>,
>> +                         <&xtal>;
>> +                clock-names = "core",
>> +                              "pclk",
>> +                              "dds_in",
>> +                              "fclk_div2",
>> +                              "fclk_div3",
>> +                              "hifi_pll",
>> +                              "xtal";
>> +        };
>> +
>> +        clkc_audio2: audio-clock-controller at fe054800 {
>> +                compatible = "amlogic,a1-audio2-clkc";
>> +                reg = <0x0 0xfe054800 0x0 0x20>;
>> +                #clock-cells = <1>;
>> +                clocks = <&clkc_periphs CLKID_AUDIO>,
>> +                         <&clkc_periphs CLKID_DDS_IN>,
>> +                         <&clkc_pll CLKID_FCLK_DIV2>,
>> +                         <&clkc_pll CLKID_FCLK_DIV3>,
>> +                         <&clkc_pll CLKID_HIFI_PLL>,
>> +                         <&xtal>;
>> +                clock-names = "pclk",
>> +                              "dds_in",
>> +                              "fclk_div2",
>> +                              "fclk_div3",
>> +                              "hifi_pll",
>> +                              "xtal";
>> +        };
>> +    };
>> diff --git a/include/dt-bindings/clock/amlogic,a1-audio-clkc.h b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>> new file mode 100644
>> index 000000000000..b30df3b1ae08
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>> @@ -0,0 +1,122 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#ifndef __A1_AUDIO_CLKC_BINDINGS_H
>> +#define __A1_AUDIO_CLKC_BINDINGS_H
>> +
>> +#define AUD_CLKID_DDR_ARB		1
>> +#define AUD_CLKID_TDMIN_A		2
>> +#define AUD_CLKID_TDMIN_B		3
>> +#define AUD_CLKID_TDMIN_LB		4
>> +#define AUD_CLKID_LOOPBACK		5
>> +#define AUD_CLKID_TDMOUT_A		6
>> +#define AUD_CLKID_TDMOUT_B		7
>> +#define AUD_CLKID_FRDDR_A		8
>> +#define AUD_CLKID_FRDDR_B		9
>> +#define AUD_CLKID_TODDR_A		10
>> +#define AUD_CLKID_TODDR_B		11
>> +#define AUD_CLKID_SPDIFIN		12
>> +#define AUD_CLKID_RESAMPLE		13
>> +#define AUD_CLKID_EQDRC			14
>> +#define AUD_CLKID_LOCKER		15
>> +#define AUD_CLKID_MST_A_MCLK_SEL	16
>> +#define AUD_CLKID_MST_A_MCLK_DIV	17
>> +#define AUD_CLKID_MST_A_MCLK		18
>> +#define AUD_CLKID_MST_B_MCLK_SEL	19
>> +#define AUD_CLKID_MST_B_MCLK_DIV	20
>> +#define AUD_CLKID_MST_B_MCLK		21
>> +#define AUD_CLKID_MST_C_MCLK_SEL	22
>> +#define AUD_CLKID_MST_C_MCLK_DIV	23
>> +#define AUD_CLKID_MST_C_MCLK		24
>> +#define AUD_CLKID_MST_D_MCLK_SEL	25
>> +#define AUD_CLKID_MST_D_MCLK_DIV	26
>> +#define AUD_CLKID_MST_D_MCLK		27
>> +#define AUD_CLKID_SPDIFIN_CLK_SEL	28
>> +#define AUD_CLKID_SPDIFIN_CLK_DIV	29
>> +#define AUD_CLKID_SPDIFIN_CLK		30
>> +#define AUD_CLKID_RESAMPLE_CLK_SEL	31
>> +#define AUD_CLKID_RESAMPLE_CLK_DIV	32
>> +#define AUD_CLKID_RESAMPLE_CLK		33
>> +#define AUD_CLKID_LOCKER_IN_CLK_SEL	34
>> +#define AUD_CLKID_LOCKER_IN_CLK_DIV	35
>> +#define AUD_CLKID_LOCKER_IN_CLK		36
>> +#define AUD_CLKID_LOCKER_OUT_CLK_SEL	37
>> +#define AUD_CLKID_LOCKER_OUT_CLK_DIV	38
>> +#define AUD_CLKID_LOCKER_OUT_CLK	39
>> +#define AUD_CLKID_EQDRC_CLK_SEL		40
>> +#define AUD_CLKID_EQDRC_CLK_DIV		41
>> +#define AUD_CLKID_EQDRC_CLK		42
>> +#define AUD_CLKID_MST_A_SCLK_PRE_EN	43
>> +#define AUD_CLKID_MST_A_SCLK_DIV	44
>> +#define AUD_CLKID_MST_A_SCLK_POST_EN	45
>> +#define AUD_CLKID_MST_A_SCLK		46
>> +#define AUD_CLKID_MST_B_SCLK_PRE_EN	47
>> +#define AUD_CLKID_MST_B_SCLK_DIV	48
>> +#define AUD_CLKID_MST_B_SCLK_POST_EN	49
>> +#define AUD_CLKID_MST_B_SCLK		50
>> +#define AUD_CLKID_MST_C_SCLK_PRE_EN	51
>> +#define AUD_CLKID_MST_C_SCLK_DIV	52
>> +#define AUD_CLKID_MST_C_SCLK_POST_EN	53
>> +#define AUD_CLKID_MST_C_SCLK		54
>> +#define AUD_CLKID_MST_D_SCLK_PRE_EN	55
>> +#define AUD_CLKID_MST_D_SCLK_DIV	56
>> +#define AUD_CLKID_MST_D_SCLK_POST_EN	57
>> +#define AUD_CLKID_MST_D_SCLK		58
>> +#define AUD_CLKID_MST_A_LRCLK_DIV	59
>> +#define AUD_CLKID_MST_A_LRCLK		60
>> +#define AUD_CLKID_MST_B_LRCLK_DIV	61
>> +#define AUD_CLKID_MST_B_LRCLK		62
>> +#define AUD_CLKID_MST_C_LRCLK_DIV	63
>> +#define AUD_CLKID_MST_C_LRCLK		64
>> +#define AUD_CLKID_MST_D_LRCLK_DIV	65
>> +#define AUD_CLKID_MST_D_LRCLK		66
>> +#define AUD_CLKID_TDMIN_A_SCLK_SEL	67
>> +#define AUD_CLKID_TDMIN_A_SCLK_PRE_EN	68
>> +#define AUD_CLKID_TDMIN_A_SCLK_POST_EN	69
>> +#define AUD_CLKID_TDMIN_A_SCLK		70
>> +#define AUD_CLKID_TDMIN_A_LRCLK		71
>> +#define AUD_CLKID_TDMIN_B_SCLK_SEL	72
>> +#define AUD_CLKID_TDMIN_B_SCLK_PRE_EN	73
>> +#define AUD_CLKID_TDMIN_B_SCLK_POST_EN	74
>> +#define AUD_CLKID_TDMIN_B_SCLK		75
>> +#define AUD_CLKID_TDMIN_B_LRCLK		76
>> +#define AUD_CLKID_TDMIN_LB_SCLK_SEL	77
>> +#define AUD_CLKID_TDMIN_LB_SCLK_PRE_EN	78
>> +#define AUD_CLKID_TDMIN_LB_SCLK_POST_EN	79
>> +#define AUD_CLKID_TDMIN_LB_SCLK		80
>> +#define AUD_CLKID_TDMIN_LB_LRCLK	81
>> +#define AUD_CLKID_TDMOUT_A_SCLK_SEL	82
>> +#define AUD_CLKID_TDMOUT_A_SCLK_PRE_EN	83
>> +#define AUD_CLKID_TDMOUT_A_SCLK_POST_EN	84
>> +#define AUD_CLKID_TDMOUT_A_SCLK		85
>> +#define AUD_CLKID_TDMOUT_A_LRCLK	86
>> +#define AUD_CLKID_TDMOUT_B_SCLK_SEL	87
>> +#define AUD_CLKID_TDMOUT_B_SCLK_PRE_EN	88
>> +#define AUD_CLKID_TDMOUT_B_SCLK_POST_EN	89
>> +#define AUD_CLKID_TDMOUT_B_SCLK		90
>> +#define AUD_CLKID_TDMOUT_B_LRCLK	91
>> +
>> +#define AUD2_CLKID_DDR_ARB		1
>> +#define AUD2_CLKID_PDM			2
>> +#define AUD2_CLKID_TDMIN_VAD		3
>> +#define AUD2_CLKID_TODDR_VAD		4
>> +#define AUD2_CLKID_VAD			5
>> +#define AUD2_CLKID_AUDIOTOP		6
>> +#define AUD2_CLKID_VAD_MCLK_SEL		7
>> +#define AUD2_CLKID_VAD_MCLK_DIV		8
>> +#define AUD2_CLKID_VAD_MCLK		9
>> +#define AUD2_CLKID_VAD_CLK_SEL		10
>> +#define AUD2_CLKID_VAD_CLK_DIV		11
>> +#define AUD2_CLKID_VAD_CLK		12
>> +#define AUD2_CLKID_PDM_DCLK_SEL		13
>> +#define AUD2_CLKID_PDM_DCLK_DIV		14
>> +#define AUD2_CLKID_PDM_DCLK		15
>> +#define AUD2_CLKID_PDM_SYSCLK_SEL	16
>> +#define AUD2_CLKID_PDM_SYSCLK_DIV	17
>> +#define AUD2_CLKID_PDM_SYSCLK		18
>> +
>> +#endif /* __A1_AUDIO_CLKC_BINDINGS_H */
>> diff --git a/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>> new file mode 100644
>> index 000000000000..653fddba1d8f
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>> @@ -0,0 +1,29 @@
>> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
>> +/*
>> + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> + *
>> + * Author: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>> + */
>> +
>> +#ifndef _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
>> +#define _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H
>> +
>> +#define AUD_RESET_DDRARB	0
>> +#define AUD_RESET_TDMIN_A	1
>> +#define AUD_RESET_TDMIN_B	2
>> +#define AUD_RESET_TDMIN_LB	3
>> +#define AUD_RESET_LOOPBACK	4
>> +#define AUD_RESET_TDMOUT_A	5
>> +#define AUD_RESET_TDMOUT_B	6
>> +#define AUD_RESET_FRDDR_A	7
>> +#define AUD_RESET_FRDDR_B	8
>> +#define AUD_RESET_TODDR_A	9
>> +#define AUD_RESET_TODDR_B	10
>> +#define AUD_RESET_SPDIFIN	11
>> +#define AUD_RESET_RESAMPLE	12
>> +#define AUD_RESET_EQDRC		13
>> +#define AUD_RESET_LOCKER	14
>> +#define AUD_RESET_TOACODEC	30
>> +#define AUD_RESET_CLKTREE	31
>> +
>> +#endif /* _DT_BINDINGS_AMLOGIC_MESON_A1_AUDIO_RESET_H */
> 
> 

-- 
Best regards
Jan Dakinevich



More information about the linux-amlogic mailing list