[RFC PATCH v2] ASoC: meson: g12a-toacodec: rework the definition of bits
Jerome Brunet
jbrunet at baylibre.com
Tue Mar 26 08:15:51 PDT 2024
On Tue 26 Mar 2024 at 02:53, Jan Dakinevich <jan.dakinevich at salutedevices.com> wrote:
> There is a lot of defines, but almost all of them are not used. Lets
> rework them:
Thanks for noticing. Please start by removing what's unused.
>
> - keep separate the definition for different platforms to make easier
> checking that they match documentation.
>
> - use LSB/MSB sufixes for uniformity.
I'd be in favor of dropping these suffixes completely.
>
> - don't use hard-coded values for already declared defines.
>
> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
> ---
> Links:
>
> [1] https://lore.kernel.org/lkml/20240314232201.2102178-1-jan.dakinevich@salutedevices.com/
>
> Changes v1 -> v2:
> - Detached from v1's series (patch 7).
> - Fixed my wrong understanding of SOC_SINGLE's input parameters.
>
> sound/soc/meson/g12a-toacodec.c | 79 ++++++++++++++++++++-------------
> 1 file changed, 49 insertions(+), 30 deletions(-)
>
> diff --git a/sound/soc/meson/g12a-toacodec.c b/sound/soc/meson/g12a-toacodec.c
> index 531bb8707a3e..22181f4bab72 100644
> --- a/sound/soc/meson/g12a-toacodec.c
> +++ b/sound/soc/meson/g12a-toacodec.c
> @@ -20,26 +20,37 @@
> #define G12A_TOACODEC_DRV_NAME "g12a-toacodec"
>
> #define TOACODEC_CTRL0 0x0
> -#define CTRL0_ENABLE_SHIFT 31
> -#define CTRL0_DAT_SEL_SM1_MSB 19
> -#define CTRL0_DAT_SEL_SM1_LSB 18
> -#define CTRL0_DAT_SEL_MSB 15
> -#define CTRL0_DAT_SEL_LSB 14
> -#define CTRL0_LANE_SEL_SM1 16
> -#define CTRL0_LANE_SEL 12
> -#define CTRL0_LRCLK_SEL_SM1_MSB 14
> -#define CTRL0_LRCLK_SEL_SM1_LSB 12
> -#define CTRL0_LRCLK_SEL_MSB 9
> -#define CTRL0_LRCLK_SEL_LSB 8
> -#define CTRL0_LRCLK_INV_SM1 BIT(10)
> -#define CTRL0_BLK_CAP_INV_SM1 BIT(9)
> -#define CTRL0_BLK_CAP_INV BIT(7)
> -#define CTRL0_BCLK_O_INV_SM1 BIT(8)
> -#define CTRL0_BCLK_O_INV BIT(6)
> -#define CTRL0_BCLK_SEL_SM1_MSB 6
> -#define CTRL0_BCLK_SEL_MSB 5
> -#define CTRL0_BCLK_SEL_LSB 4
> -#define CTRL0_MCLK_SEL GENMASK(2, 0)
> +
> +/* Common bits */
> +#define CTRL0_ENABLE_SHIFT 31
> +#define CTRL0_MCLK_SEL GENMASK(2, 0)
> +
> +/* G12A bits */
> +#define CTRL0_DAT_SEL_G12A_MSB 15
> +#define CTRL0_DAT_SEL_G12A_LSB 14
> +#define CTRL0_LANE_SEL_G12A_MSB 13
> +#define CTRL0_LANE_SEL_G12A_LSB 12
> +#define CTRL0_LANE_SEL_G12A_MAX 3
> +#define CTRL0_LRCLK_SEL_G12A_MSB 9
> +#define CTRL0_LRCLK_SEL_G12A_LSB 8
> +#define CTRL0_BLK_CAP_INV_G12A BIT(7)
> +#define CTRL0_BCLK_O_INV_G12A BIT(6)
> +#define CTRL0_BCLK_SEL_G12A_MSB 5
> +#define CTRL0_BCLK_SEL_G12A_LSB 4
> +
> +/* SM1 bits */
> +#define CTRL0_DAT_SEL_SM1_MSB 19
> +#define CTRL0_DAT_SEL_SM1_LSB 18
> +#define CTRL0_LANE_SEL_SM1_MSB 17
> +#define CTRL0_LANE_SEL_SM1_LSB 16
> +#define CTRL0_LANE_SEL_SM1_MAX 3
> +#define CTRL0_LRCLK_SEL_SM1_MSB 14
> +#define CTRL0_LRCLK_SEL_SM1_LSB 12
> +#define CTRL0_LRCLK_INV_SM1 BIT(10)
> +#define CTRL0_BLK_CAP_INV_SM1 BIT(9)
> +#define CTRL0_BCLK_O_INV_SM1 BIT(8)
> +#define CTRL0_BCLK_SEL_SM1_MSB 6
> +#define CTRL0_BCLK_SEL_SM1_LSB 4
>
> #define TOACODEC_OUT_CHMAX 2
>
> @@ -108,7 +119,7 @@ static int g12a_toacodec_mux_put_enum(struct snd_kcontrol *kcontrol,
> }
>
> static SOC_ENUM_SINGLE_DECL(g12a_toacodec_mux_enum, TOACODEC_CTRL0,
> - CTRL0_DAT_SEL_LSB,
> + CTRL0_DAT_SEL_G12A_LSB,
> g12a_toacodec_mux_texts);
>
> static SOC_ENUM_SINGLE_DECL(sm1_toacodec_mux_enum, TOACODEC_CTRL0,
> @@ -210,7 +221,7 @@ static int g12a_toacodec_component_probe(struct snd_soc_component *c)
> {
> /* Initialize the static clock parameters */
> return snd_soc_component_write(c, TOACODEC_CTRL0,
> - CTRL0_BLK_CAP_INV);
> + CTRL0_BLK_CAP_INV_G12A);
> }
>
> static int sm1_toacodec_component_probe(struct snd_soc_component *c)
> @@ -229,11 +240,13 @@ static const struct snd_soc_dapm_route g12a_toacodec_routes[] = {
> };
>
> static const struct snd_kcontrol_new g12a_toacodec_controls[] = {
> - SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL, 3, 0),
> + SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_G12A_LSB,
> + CTRL0_LANE_SEL_G12A_MAX, 0),
> };
>
> static const struct snd_kcontrol_new sm1_toacodec_controls[] = {
> - SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1, 3, 0),
> + SOC_SINGLE("Lane Select", TOACODEC_CTRL0, CTRL0_LANE_SEL_SM1_LSB,
> + CTRL0_LANE_SEL_SM1_MAX, 0),
> };
>
> static const struct snd_soc_component_driver g12a_toacodec_component_drv = {
> @@ -266,16 +279,22 @@ static const struct regmap_config g12a_toacodec_regmap_cfg = {
>
> static const struct g12a_toacodec_match_data g12a_toacodec_match_data = {
> .component_drv = &g12a_toacodec_component_drv,
> - .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 14, 15),
> - .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 8, 9),
> - .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 5),
> + .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_DAT_SEL_G12A_LSB,
> + CTRL0_DAT_SEL_G12A_MSB),
> + .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_LRCLK_SEL_G12A_LSB,
> + CTRL0_LRCLK_SEL_G12A_MSB),
> + .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_BCLK_SEL_G12A_LSB,
> + CTRL0_BCLK_SEL_G12A_MSB),
> };
>
> static const struct g12a_toacodec_match_data sm1_toacodec_match_data = {
> .component_drv = &sm1_toacodec_component_drv,
> - .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, 18, 19),
> - .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, 12, 14),
> - .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, 4, 6),
> + .field_dat_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_DAT_SEL_SM1_LSB,
> + CTRL0_DAT_SEL_SM1_MSB),
> + .field_lrclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_LRCLK_SEL_SM1_LSB,
> + CTRL0_LRCLK_SEL_SM1_MSB),
> + .field_bclk_sel = REG_FIELD(TOACODEC_CTRL0, CTRL0_BCLK_SEL_SM1_LSB,
> + CTRL0_BCLK_SEL_SM1_MSB),
Those defines are already platform specific by the structure holding
them and the defines you have added are not helping readability.
I don't see the point to see.
I'd prefer to keep the field defined as they are.
> };
>
> static const struct of_device_id g12a_toacodec_of_match[] = {
--
Jerome
More information about the linux-amlogic
mailing list