[PATCH v1 1/3] iio: adc: meson: fix voltage reference selection field name typo

[George Stark]

Hello Martin

Thanks for the patch

Should the tag
Fixes: 90c6241860bf ("iio: adc: meson: init voltage control bits")
be added?

On 3/24/24 02:13, Martin Blumenstingl wrote:
> The field should be called "vref_voltage", without a typo in the word
> voltage. No functional changes intended.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> ---
>   drivers/iio/adc/meson_saradc.c | 10 +++++-----
>   1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
> index 13b473d8c6c7..2615d74534df 100644
> --- a/drivers/iio/adc/meson_saradc.c
> +++ b/drivers/iio/adc/meson_saradc.c
> @@ -327,7 +327,7 @@ struct meson_sar_adc_param {
>   	u8					vref_select;
>   	u8					cmv_select;
>   	u8					adc_eoc;
> -	enum meson_sar_adc_vref_sel		vref_volatge;
> +	enum meson_sar_adc_vref_sel		vref_voltage;
>   };
>   
>   struct meson_sar_adc_data {
> @@ -1001,7 +1001,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
>   		}
>   
>   		regval = FIELD_PREP(MESON_SAR_ADC_REG11_VREF_VOLTAGE,
> -				    priv->param->vref_volatge);
> +				    priv->param->vref_voltage);
>   		regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
>   				   MESON_SAR_ADC_REG11_VREF_VOLTAGE, regval);
>   
> @@ -1225,7 +1225,7 @@ static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
>   	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
>   	.resolution = 10,
>   	.has_reg11 = true,
> -	.vref_volatge = 1,
> +	.vref_voltage = 1,
>   	.cmv_select = 1,
>   };
>   
> @@ -1237,7 +1237,7 @@ static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
>   	.resolution = 12,
>   	.disable_ring_counter = 1,
>   	.has_reg11 = true,
> -	.vref_volatge = 1,
> +	.vref_voltage = 1,
>   	.cmv_select = 1,
>   };
>   
> @@ -1249,7 +1249,7 @@ static const struct meson_sar_adc_param meson_sar_adc_axg_param = {
>   	.resolution = 12,
>   	.disable_ring_counter = 1,
>   	.has_reg11 = true,
> -	.vref_volatge = 1,
> +	.vref_voltage = 1,
>   	.has_vref_select = true,
>   	.vref_select = VREF_VDDA,
>   	.cmv_select = 1,

-- 
Best regards
George