[PATCH v1 3/3] iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access

Martin Blumenstingl martin.blumenstingl at googlemail.com
Sat Mar 23 16:13:09 PDT 2024


Simply check the max_register value to decide whether
MESON_SAR_ADC_REG11 is present on the current IP revision. This allows
dropping two additional bool fields from struct meson_sar_adc_param
which previously had to be manually kept in sync. No functional changes
intended.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 drivers/iio/adc/meson_saradc.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)

diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 6b2af0c2bbc7..8c1e542c0ab7 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -320,14 +320,12 @@ static const struct iio_chan_spec meson_sar_adc_and_temp_iio_channels[] = {
 struct meson_sar_adc_param {
 	bool					has_bl30_integration;
 	unsigned long				clock_rate;
-	u32					bandgap_reg;
 	unsigned int				resolution;
 	const struct regmap_config		*regmap_config;
 	u8					temperature_trimming_bits;
 	unsigned int				temperature_multiplier;
 	unsigned int				temperature_divider;
 	bool					disable_ring_counter;
-	bool					has_reg11;
 	bool					has_vref_select;
 	bool					cmv_select;
 	bool					adc_eoc;
@@ -995,7 +993,7 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 			   MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN,
 			   regval);
 
-	if (priv->param->has_reg11) {
+	if (priv->param->regmap_config->max_register >= MESON_SAR_ADC_REG11) {
 		regval = priv->param->adc_eoc ? MESON_SAR_ADC_REG11_EOC : 0;
 		regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
 				   MESON_SAR_ADC_REG11_EOC, regval);
@@ -1031,16 +1029,15 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
 static void meson_sar_adc_set_bandgap(struct iio_dev *indio_dev, bool on_off)
 {
 	struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
-	const struct meson_sar_adc_param *param = priv->param;
-	u32 enable_mask;
 
-	if (param->bandgap_reg == MESON_SAR_ADC_REG11)
-		enable_mask = MESON_SAR_ADC_REG11_BANDGAP_EN;
+	if (priv->param->regmap_config->max_register >= MESON_SAR_ADC_REG11)
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
+				   MESON_SAR_ADC_REG11_BANDGAP_EN,
+				   on_off ? MESON_SAR_ADC_REG11_BANDGAP_EN : 0);
 	else
-		enable_mask = MESON_SAR_ADC_DELTA_10_TS_VBG_EN;
-
-	regmap_update_bits(priv->regmap, param->bandgap_reg, enable_mask,
-			   on_off ? enable_mask : 0);
+		regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
+				   MESON_SAR_ADC_DELTA_10_TS_VBG_EN,
+				   on_off ? MESON_SAR_ADC_DELTA_10_TS_VBG_EN : 0);
 }
 
 static int meson_sar_adc_hw_enable(struct iio_dev *indio_dev)
@@ -1205,7 +1202,6 @@ static const struct iio_info meson_sar_adc_iio_info = {
 static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
 	.has_bl30_integration = false,
 	.clock_rate = 1150000,
-	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
 	.regmap_config = &meson_sar_adc_regmap_config_meson8,
 	.resolution = 10,
 	.temperature_trimming_bits = 4,
@@ -1216,7 +1212,6 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8_param = {
 static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = {
 	.has_bl30_integration = false,
 	.clock_rate = 1150000,
-	.bandgap_reg = MESON_SAR_ADC_DELTA_10,
 	.regmap_config = &meson_sar_adc_regmap_config_meson8,
 	.resolution = 10,
 	.temperature_trimming_bits = 5,
@@ -1227,10 +1222,8 @@ static const struct meson_sar_adc_param meson_sar_adc_meson8b_param = {
 static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
 	.has_bl30_integration = true,
 	.clock_rate = 1200000,
-	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 10,
-	.has_reg11 = true,
 	.vref_voltage = VREF_VOLTAGE_1V8,
 	.cmv_select = true,
 };
@@ -1238,11 +1231,9 @@ static const struct meson_sar_adc_param meson_sar_adc_gxbb_param = {
 static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
 	.has_bl30_integration = true,
 	.clock_rate = 1200000,
-	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 12,
 	.disable_ring_counter = 1,
-	.has_reg11 = true,
 	.vref_voltage = VREF_VOLTAGE_1V8,
 	.cmv_select = true,
 };
@@ -1250,11 +1241,9 @@ static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
 static const struct meson_sar_adc_param meson_sar_adc_axg_param = {
 	.has_bl30_integration = true,
 	.clock_rate = 1200000,
-	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 12,
 	.disable_ring_counter = 1,
-	.has_reg11 = true,
 	.vref_voltage = VREF_VOLTAGE_1V8,
 	.has_vref_select = true,
 	.vref_select = VREF_VDDA,
@@ -1264,11 +1253,9 @@ static const struct meson_sar_adc_param meson_sar_adc_axg_param = {
 static const struct meson_sar_adc_param meson_sar_adc_g12a_param = {
 	.has_bl30_integration = false,
 	.clock_rate = 1200000,
-	.bandgap_reg = MESON_SAR_ADC_REG11,
 	.regmap_config = &meson_sar_adc_regmap_config_gxbb,
 	.resolution = 12,
 	.disable_ring_counter = 1,
-	.has_reg11 = true,
 	.vref_voltage = VREF_VOLTAGE_0V9,
 	.adc_eoc = true,
 	.has_vref_select = true,
-- 
2.44.0




More information about the linux-amlogic mailing list