[PATCH 00/25] Introduce support of audio for Amlogic A1 SoC family

[Neil Armstrong]

Hi Jan!

On 15/03/2024 00:21, Jan Dakinevich wrote:
> This series includes the following:
> 
>   - new audio clock and reset controller data and adaptation for it of existing
>     code (patches 0001..0004);
> 
>   - adaptation of existing audio components for A1 Soc (patches 0005..0021);
> 
>   - handy cosmetics for dai-link naming (patches 0022..0023);
> 
>   - integration of audio devices into common trees (patch 0024);
> 
>   - audio support bring up on Amlogic ad402 reference board (patch 0025). This
>     patch is not actually checked on real hardware (because all ad402 that we had
>     were burned out). This patch is based on ad402's schematics and on experience
>     with our own hardware (which is very close to reference board);

Thanks for your serie, it's nice you're working on upstreaming this feature.

In my opinion it's fine to have a "big" initial serie if you're not sure
if your changes are ok, but next time add the RFC tag so we know it's not
a final changeset and you seek advices.

Overall the code is clean and your patch order makes sense if they were meant
to be applied by a single maintainer, but in this case it will be split
into multiple subsystems so it's better to split them as Jerome explained
to ease review and the maintainers process.

Don't hesitate discussing with us in the #linux-amlogic IRC channel
on Libera.Chat, the goal is to reduce the number of patch version and
ease the review and maintainance process.

Concerning the link-name property, I think it should be done afterwards
since it's not necessary to support audio on A1, and I think it could
be extended to other SoC boards (which would be a great feature).

Neil

> 
> Dmitry Rokosov (2):
>    ASoC: dt-bindings: meson: introduce link-name optional property
>    ASoC: meson: implement link-name optional property in meson card utils
> 
> Jan Dakinevich (23):
>    clk: meson: a1: restrict an amount of 'hifi_pll' params
>    clk: meson: axg: move reset controller's code to separate module
>    dt-bindings: clock: meson: add A1 audio clock and reset controller
>      bindings
>    clk: meson: a1: add the audio clock controller driver
>    ASoC: meson: codec-glue: add support for capture stream
>    ASoC: meson: g12a-toacodec: fix "Lane Select" width
>    ASoC: meson: g12a-toacodec: rework the definition of bits
>    ASoC: dt-bindings: meson: g12a-toacodec: add support for A1 SoC family
>    ASoC: meson: g12a-toacodec: add support for A1 SoC family
>    ASoC: meson: t9015: prepare to adding new platforms
>    ASoC: dt-bindings: meson: t9015: add support for A1 SoC family
>    ASoC: meson: t9015: add support for A1 SoC family
>    ASoC: dt-bindings: meson: axg-pdm: document 'sysrate' property
>    ASoC: meson: axg-pdm: introduce 'sysrate' property
>    pinctrl/meson: fix typo in PDM's pin name
>    ASoC: dt-bindings: meson: meson-axg-audio-arb: claim support of A1 SoC
>      family
>    ASoC: dt-bindings: meson: axg-fifo: claim support of A1 SoC family
>    ASoC: dt-bindings: meson: axg-pdm: claim support of A1 SoC family
>    ASoC: dt-bindings: meson: axg-sound-card: claim support of A1 SoC
>      family
>    ASoC: dt-bindings: meson: axg-tdm-formatters: claim support of A1 SoC
>      family
>    ASoC: dt-bindings: meson: axg-tdm-iface: claim support of A1 SoC
>      family
>    arm64: dts: meson: a1: add audio devices
>    arm64: dts: ad402: enable audio
> 
>   .../bindings/clock/amlogic,a1-audio-clkc.yaml |  83 +++
>   .../reset/amlogic,meson-axg-audio-arb.yaml    |  10 +-
>   .../bindings/sound/amlogic,axg-fifo.yaml      |   8 +
>   .../bindings/sound/amlogic,axg-pdm.yaml       |   5 +
>   .../sound/amlogic,axg-sound-card.yaml         |  12 +-
>   .../sound/amlogic,axg-tdm-formatters.yaml     |  22 +-
>   .../bindings/sound/amlogic,axg-tdm-iface.yaml |   6 +-
>   .../bindings/sound/amlogic,g12a-toacodec.yaml |   1 +
>   .../bindings/sound/amlogic,gx-sound-card.yaml |   6 +
>   .../bindings/sound/amlogic,t9015.yaml         |   4 +-
>   .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 126 ++++
>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 471 +++++++++++++++
>   drivers/clk/meson/Kconfig                     |  18 +
>   drivers/clk/meson/Makefile                    |   2 +
>   drivers/clk/meson/a1-audio.c                  | 556 ++++++++++++++++++
>   drivers/clk/meson/a1-audio.h                  |  58 ++
>   drivers/clk/meson/a1-pll.c                    |   8 +-
>   drivers/clk/meson/axg-audio.c                 |  95 +--
>   drivers/clk/meson/meson-audio-rstc.c          | 109 ++++
>   drivers/clk/meson/meson-audio-rstc.h          |  12 +
>   drivers/pinctrl/meson/pinctrl-meson-a1.c      |   6 +-
>   .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 ++++
>   .../reset/amlogic,meson-a1-audio-reset.h      |  29 +
>   .../dt-bindings/sound/meson-g12a-toacodec.h   |   5 +
>   sound/soc/meson/axg-pdm.c                     |  10 +-
>   sound/soc/meson/g12a-toacodec.c               | 298 ++++++++--
>   sound/soc/meson/meson-card-utils.c            |  12 +-
>   sound/soc/meson/meson-codec-glue.c            | 174 ++++--
>   sound/soc/meson/meson-codec-glue.h            |  23 +
>   sound/soc/meson/t9015.c                       | 326 +++++++++-
>   30 files changed, 2394 insertions(+), 223 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
>   create mode 100644 drivers/clk/meson/a1-audio.c
>   create mode 100644 drivers/clk/meson/a1-audio.h
>   create mode 100644 drivers/clk/meson/meson-audio-rstc.c
>   create mode 100644 drivers/clk/meson/meson-audio-rstc.h
>   create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
>   create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h
>