[PATCH 3/4] arm64: dts: add support for A4 based Amlogic BA400

[Xianwei Zhao]

Hi Krzysztof,
      Thanks for your reivew.

On 2024/3/12 19:07, Krzysztof Kozlowski wrote:
> [ EXTERNAL EMAIL ]
> 
> On 12/03/2024 10:18, Xianwei Zhao via B4 Relay wrote:
>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>>
>> Amlogic A4 is an application processor designed for smart audio
>> and IoT applications.
>>
>> Add basic support for the A4 based Amlogic BA400 board, which describes
>> the following components: CPU, GIC, IRQ, Timer and UART.
>> These are capable of booting up into the serial console.
>>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> ---
>>   arch/arm64/boot/dts/amlogic/Makefile               |  1 +
>>   .../boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts   | 43 ++++++++++
>>   arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi        | 99 ++++++++++++++++++++++
>>   3 files changed, 143 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index 1ab160bf928a..9a50ec11bb8d 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0
>> +dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
>>   dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>> new file mode 100644
>> index 000000000000..60f9f23858c6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4-a113l2-ba400.dts
>> @@ -0,0 +1,43 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "amlogic-a4.dtsi"
>> +
>> +/ {
>> +     model = "Amlogic A113L2 ba400 Development Board";
>> +     compatible = "amlogic,ba400","amlogic,a4";
>> +     interrupt-parent = <&gic>;
>> +     #address-cells = <2>;
>> +     #size-cells = <2>;
>> +
>> +     aliases {
>> +             serial0 = &uart_b;
>> +     };
>> +
>> +     memory at 0 {
>> +             device_type = "memory";
>> +             reg = <0x0 0x0 0x0 0x40000000>;
>> +     };
>> +
>> +     reserved-memory {
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             /* 52 MiB reserved for ARM Trusted Firmware */
>> +             secmon_reserved:linux,secmon {
> 
> Missing space after:, unusual format of node name. Are you sure this
> fits DTS coding convention?
> 
Will fix it.
>> +                     compatible = "shared-dma-pool";
>> +                     no-map;
>> +                     alignment = <0x0 0x400000>;
>> +                     reg = <0x0 0x05000000 0x0 0x3400000>;
>> +             };
>> +     };
>> +};
>> +
>> +&uart_b {
>> +     status = "okay";
>> +};
>> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>> new file mode 100644
>> index 000000000000..7e8745010b52
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
>> @@ -0,0 +1,99 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/gpio/gpio.h>
>> +/ {
>> +     cpus {
>> +             #address-cells = <2>;
>> +             #size-cells = <0>;
>> +
>> +             cpu0: cpu at 0 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a53";
>> +                     reg = <0x0 0x0>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu1: cpu at 1 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a53";
>> +                     reg = <0x0 0x1>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu2: cpu at 2 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a53";
>> +                     reg = <0x0 0x2>;
>> +                     enable-method = "psci";
>> +             };
>> +
>> +             cpu3: cpu at 3 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a53";
>> +                     reg = <0x0 0x3>;
>> +                     enable-method = "psci";
>> +             };
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv8-timer";
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
>> +                          <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
>> +     };
>> +
>> +     psci {
>> +             compatible = "arm,psci-0.2";
>> +             method = "smc";
>> +     };
>> +
>> +     xtal: xtal-clk {
>> +             compatible = "fixed-clock";
>> +             clock-frequency = <24000000>;
>> +             clock-output-names = "xtal";
>> +             #clock-cells = <0>;
>> +     };
>> +
>> +     soc {
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             gic: interrupt-controller at fff01000 {
>> +                     compatible = "arm,gic-400";
>> +                     #interrupt-cells = <3>;
>> +                     #address-cells = <0>;
>> +                     interrupt-controller;
>> +                     reg = <0x0 0xfff01000 0 0x1000>,
>> +                           <0x0 0xfff02000 0 0x2000>,
>> +                           <0x0 0xfff04000 0 0x2000>,
>> +                           <0x0 0xfff06000 0 0x2000>;
> 
> Odd order of properties... reg is usually the second.
Yes. Will fix it.
> 
> 
> 
> Best regards,
> Krzysztof
>