[PATCH 1/2] arm64: dts: amlogic: gx: correct hdmi clocks
Jerome Brunet
jbrunet at baylibre.com
Wed Jun 26 08:27:30 PDT 2024
The clocks provided to HDMI tx are not consistent between gx and g12:
* gx receives the peripheral clock as 'isfr' while g12 receives it as
'iahb'
* g12 gets the HDMI system clock as 'isfr' but gx does not even get it.
It surely needs that clock since the driver is directly poking around
the clock controller's registers for that clock.
Align gx SoCs with g12 and provide:
* the HDMI peripheral clock as 'iahb'
* the HDMI system clock as 'isfr'
Fixes: 6939db7e0dbf ("ARM64: dts: meson-gx: Add support for HDMI output")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 ++--
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index d8a386c31914..041c37b809f2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -311,8 +311,8 @@ &hdmi_tx {
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
+ clocks = <&clkc CLKID_HDMI>,
+ <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 82386feb5177..067108800a58 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -323,8 +323,8 @@ &hdmi_tx {
<&reset RESET_HDMI_SYSTEM_RESET>,
<&reset RESET_HDMI_TX>;
reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
- clocks = <&clkc CLKID_HDMI_PCLK>,
- <&clkc CLKID_CLK81>,
+ clocks = <&clkc CLKID_HDMI>,
+ <&clkc CLKID_HDMI_PCLK>,
<&clkc CLKID_GCLK_VENCI_INT0>;
clock-names = "isfr", "iahb", "venci";
power-domains = <&pwrc PWRC_GXBB_VPU_ID>;
--
2.43.0
More information about the linux-amlogic
mailing list