[PATCH v3 40/41] iio: temperature: mlx90632: make use of regmap_clear_bits()

[Trevor Gamblin]

Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig at baylibre.com>
Acked-by: Crt Mori <cmo at melexis.com>
Signed-off-by: Trevor Gamblin <tgamblin at baylibre.com>
---
 drivers/iio/temperature/mlx90632.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index 8a57be108620..e7de30f613d2 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -334,8 +334,8 @@ static int mlx90632_perform_measurement(struct mlx90632_data *data)
 	unsigned int reg_status;
 	int ret;
 
-	ret = regmap_update_bits(data->regmap, MLX90632_REG_STATUS,
-				 MLX90632_STAT_DATA_RDY, 0);
+	ret = regmap_clear_bits(data->regmap, MLX90632_REG_STATUS,
+				MLX90632_STAT_DATA_RDY);
 	if (ret < 0)
 		return ret;
 

-- 
2.45.2