[PATCH v3 12/41] iio: adc: intel_mrfld_adc: make use of regmap_clear_bits()

[Trevor Gamblin]

Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig at baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin at baylibre.com>
---
 drivers/iio/adc/intel_mrfld_adc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/intel_mrfld_adc.c b/drivers/iio/adc/intel_mrfld_adc.c
index c7f40ae6e608..0590a126f321 100644
--- a/drivers/iio/adc/intel_mrfld_adc.c
+++ b/drivers/iio/adc/intel_mrfld_adc.c
@@ -81,8 +81,8 @@ static int mrfld_adc_single_conv(struct iio_dev *indio_dev,
 
 	reinit_completion(&adc->completion);
 
-	regmap_update_bits(regmap, BCOVE_MADCIRQ, BCOVE_ADCIRQ_ALL, 0);
-	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_ADC, 0);
+	regmap_clear_bits(regmap, BCOVE_MADCIRQ, BCOVE_ADCIRQ_ALL);
+	regmap_clear_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_ADC);
 
 	ret = regmap_read_poll_timeout(regmap, BCOVE_GPADCREQ, req,
 				       !(req & BCOVE_GPADCREQ_BUSY),

-- 
2.45.2