[PATCH v3 00/41] iio: simplify with regmap_set_bits(), regmap_clear_bits()
Trevor Gamblin
tgamblin at baylibre.com
Mon Jun 17 06:49:40 PDT 2024
Simplify the way regmap is accessed in iio drivers.
Instead of using regmap_update_bits() and passing the mask twice, use
regmap_set_bits().
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().
The series is marked as v3, but the previous two revisions were single
patches. There was also a resend of v1 due to not properly CCing the
mailing lists on the first attempt. Trailers were pulled in from those
where relevant.
Link to v2: https://lore.kernel.org/linux-iio/20240613133927.3851344-1-tgamblin@baylibre.com/
Link to v1: https://lore.kernel.org/linux-iio/20240611165214.4091591-1-tgamblin@baylibre.com/
Suggested-by: Uwe Kleine-König <u.kleine-koenig at baylibre.com>
Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Trevor Gamblin <tgamblin at baylibre.com>
---
Trevor Gamblin (41):
iio: accel: fxls8962af-core: Make use of regmap_set_bits(), regmap_clear_bits()
iio: accel: kxsd9: Make use of regmap_clear_bits()
iio: accel: msa311: make use of regmap_clear_bits()
iio: adc: ad4130: make use of regmap_clear_bits()
iio: adc: axp20x_adc: make use of regmap_set_bits()
iio: adc: axp288_adc: make use of regmap_set_bits()
iio: adc: bcm_iproc_adc: make use of regmap_clear_bits()
iio: adc: berlin2-adc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: cpcap-adc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: fsl-imx25-gcq: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: ina2xx-adc: make use of regmap_clear_bits()
iio: adc: intel_mrfld_adc: make use of regmap_clear_bits()
iio: adc: meson_saradc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: mp2629_adc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: qcom-spmi-rradc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: rn5t618-adc: make use of regmap_set_bits()
iio: adc: sc27xx_adc: make use of regmap_clear_bits(), regmap_set_bits()
iio: adc: stm32-dfsdm-adc: make use of regmap_clear_bits(), regmap_set_bits()
iio: dac: ltc2688: make use of regmap_set_bits()
iio: dac: stm32-dac-core: make use of regmap_set_bits()
iio: gyro: bmg160_core: make use of regmap_clear_bits()
iio: gyro: mpu3050-core: make use of regmap_clear_bits(), regmap_set_bits()
iio: health: afe4403: make use of regmap_clear_bits(), regmap_set_bits()
iio: health: afe4404: make use of regmap_clear_bits(), regmap_set_bits()
iio: health: max30100: make use of regmap_set_bits()
iio: health: max30102: make use of regmap_set_bits()
iio: imu: inv_icm42600: make use of regmap_clear_bits(), regmap_set_bits()
iio: light: adux1020: make use of regmap_clear_bits(), regmap_set_bits()
iio: light: iqs621-als: make use of regmap_clear_bits()
iio: light: isl29018: make use of regmap_clear_bits()
iio: light: st_uvis25_core: make use of regmap_clear_bits()
iio: light: veml6030: make use of regmap_clear_bits()
iio: magnetometer: ak8974: make use of regmap_set_bits()
iio: magnetometer: mmc35240: make use of regmap_set_bits()
iio: pressure: bmp280-core: make use of regmap_clear_bits()
iio: proximity: sx9324: make use of regmap_set_bits()
iio: proximity: sx9360: make use of regmap_set_bits()
iio: proximity: sx9500: make use of regmap_clear_bits(), regmap_set_bits()
iio: proximity: sx_common: make use of regmap_clear_bits(), regmap_set_bits()
iio: temperature: mlx90632: make use of regmap_clear_bits()
iio: trigger: stm32-timer-trigger: make use of regmap_clear_bits(), regmap_set_bits()
drivers/iio/accel/fxls8962af-core.c | 18 ++--
drivers/iio/accel/kxsd9.c | 6 +-
drivers/iio/accel/msa311.c | 8 +-
drivers/iio/adc/ad4130.c | 4 +-
drivers/iio/adc/axp20x_adc.c | 5 +-
drivers/iio/adc/axp288_adc.c | 4 +-
drivers/iio/adc/bcm_iproc_adc.c | 8 +-
drivers/iio/adc/berlin2-adc.c | 24 +++--
drivers/iio/adc/cpcap-adc.c | 46 ++++------
drivers/iio/adc/fsl-imx25-gcq.c | 16 ++--
drivers/iio/adc/ina2xx-adc.c | 3 +-
drivers/iio/adc/intel_mrfld_adc.c | 4 +-
drivers/iio/adc/meson_saradc.c | 101 +++++++++------------
drivers/iio/adc/mp2629_adc.c | 19 ++--
drivers/iio/adc/qcom-spmi-rradc.c | 50 +++++-----
drivers/iio/adc/rn5t618-adc.c | 5 +-
drivers/iio/adc/sc27xx_adc.c | 41 ++++-----
drivers/iio/adc/stm32-dfsdm-adc.c | 29 +++---
drivers/iio/dac/ltc2688.c | 5 +-
drivers/iio/dac/stm32-dac-core.c | 5 +-
drivers/iio/gyro/bmg160_core.c | 4 +-
drivers/iio/gyro/mpu3050-core.c | 33 +++----
drivers/iio/health/afe4403.c | 9 +-
drivers/iio/health/afe4404.c | 9 +-
drivers/iio/health/max30100.c | 5 +-
drivers/iio/health/max30102.c | 5 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_buffer.c | 14 ++-
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 9 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 4 +-
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 4 +-
drivers/iio/light/adux1020.c | 13 ++-
drivers/iio/light/iqs621-als.c | 4 +-
drivers/iio/light/isl29018.c | 6 +-
drivers/iio/light/st_uvis25_core.c | 4 +-
drivers/iio/light/veml6030.c | 4 +-
drivers/iio/magnetometer/ak8974.c | 11 +--
drivers/iio/magnetometer/mmc35240.c | 8 +-
drivers/iio/pressure/bmp280-core.c | 4 +-
drivers/iio/proximity/sx9324.c | 5 +-
drivers/iio/proximity/sx9360.c | 5 +-
drivers/iio/proximity/sx9500.c | 12 +--
drivers/iio/proximity/sx_common.c | 9 +-
drivers/iio/temperature/mlx90632.c | 4 +-
drivers/iio/trigger/stm32-timer-trigger.c | 34 ++++---
44 files changed, 273 insertions(+), 347 deletions(-)
---
base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0
change-id: 20240614-review-7e60d159e75d
Best regards,
--
Trevor Gamblin <tgamblin at baylibre.com>
More information about the linux-amlogic
mailing list