[PATCH v1 0/2] arm64: meson: add support for JetHome JetHub D2

[Viacheslav]

This series can be skipped, I will send a updated version.

07/06/2024 17.50, Viacheslav Bocharov wrote:
> Add support for new controller.
> JetHome Jethub D2 (j200) is a home automation controller with the following
> features:
>    - DIN Rail Mounting
>    - Amlogic S905X3 (ARM Cortex-A55) quad-core
>    - micro-HDMI video out
>    - 4GB LPDDR4
>    - 32GB eMMC flash
>    - 1 x USB 2.0
>    - 1 x 10/100/1000Mbps ethernet
>    - two module slots for radio/wire interface cards
>    - 2 x gpio LEDS
>    - 1 x 1-Wire
>    - 1 x RS-485
>    - 3 x dry contact digital GPIO inputs
>    - 2 x relay GPIO outputs
>    - DC 9-36V power source with battery UPS on board option
> 
> Viacheslav Bocharov (2):
>    dt-bindings: arm: amlogic: add binding for JetHome JetHub D2
>    arm64: dts: meson-axg: add support for JetHome JetHub D2 (j200)
> 
>   .../devicetree/bindings/arm/amlogic.yaml      |   1 +
>   arch/arm64/boot/dts/amlogic/Makefile          |   1 +
>   .../amlogic/meson-sm1-jethome-jethub-j200.dts | 614 ++++++++++++++++++
>   3 files changed, 616 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dts
> 
> 
> base-commit: 32f88d65f01bf6f45476d7edbe675e44fb9e1d58