[PATCH v1 0/2] arm64: meson: add support for JetHome JetHub D2

[Viacheslav Bocharov]

Add support for new controller.
JetHome Jethub D2 (j200) is a home automation controller with the following
features:
  - DIN Rail Mounting
  - Amlogic S905X3 (ARM Cortex-A55) quad-core
  - micro-HDMI video out
  - 4GB LPDDR4
  - 32GB eMMC flash
  - 1 x USB 2.0
  - 1 x 10/100/1000Mbps ethernet
  - two module slots for radio/wire interface cards
  - 2 x gpio LEDS
  - 1 x 1-Wire
  - 1 x RS-485
  - 3 x dry contact digital GPIO inputs
  - 2 x relay GPIO outputs
  - DC 9-36V power source with battery UPS on board option

Viacheslav Bocharov (2):
  dt-bindings: arm: amlogic: add binding for JetHome JetHub D2
  arm64: dts: meson-axg: add support for JetHome JetHub D2 (j200)

 .../devicetree/bindings/arm/amlogic.yaml      |   1 +
 arch/arm64/boot/dts/amlogic/Makefile          |   1 +
 .../amlogic/meson-sm1-jethome-jethub-j200.dts | 614 ++++++++++++++++++
 3 files changed, 616 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-sm1-jethome-jethub-j200.dts


base-commit: 32f88d65f01bf6f45476d7edbe675e44fb9e1d58
-- 
2.45.2