[PATCH 3/3] arm64: dts: meson: add initial support for Dreambox One/Two

Neil Armstrong neil.armstrong at linaro.org
Fri Jun 7 01:06:45 PDT 2024


On 06/06/2024 11:45, Christian Hewitt wrote:
> Dreambox One and Dreambox Two are based on the Amlogic W400 reference
> board with an S922X chip and the following specs:
> 
> - 2GB DDR3 RAM
> - 16GB eMMC
> - 10/100/1000 Base-T Ethernet
> - AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
> - HDMI 2.1 video
> - S/PDIF optical output
> - 2x DVB-S2/T2
> - Smartcard Reader Slot
> - 2x USB 2.0 port (1x micro-USB for service)
> - 1x USB 3.0 port
> - IR receiver
> - 1x Power LED (blue)
> - 1x Power button (top)
> - 1x Update/Reset button (underside)
> - 1x micro SD card slot
> 
> Dreambox Two differences:
> 
> - 3" Colour LCD display (MIPI-DSI)
> - Common Interface Slot
> 
> Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
> ---
>   arch/arm64/boot/dts/amlogic/Makefile          |   2 +
>   .../dts/amlogic/meson-g12b-dreambox-one.dts   |  17 ++
>   .../dts/amlogic/meson-g12b-dreambox-two.dts   |  20 +++
>   .../boot/dts/amlogic/meson-g12b-dreambox.dtsi | 159 ++++++++++++++++++
>   4 files changed, 198 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
>   create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 0746e01b5853..4addcae2c54e 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -21,6 +21,8 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3-ts050.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-cm4io.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-bananapi-cm4-mnt-reform2.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-one.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-dreambox-two.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gsking-x.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
>   dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
> new file mode 100644
> index 000000000000..ecfa1c683dde
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-one.dts
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-dreambox.dtsi"
> +
> +/ {
> +	compatible = "dream,dreambox-one", "amlogic,s922x", "amlogic,g12b";
> +	model = "Dreambox One";
> +};
> +
> +&sd_emmc_a {
> +	sd-uhs-sdr12;
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
> new file mode 100644
> index 000000000000..df0d71983c3d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox-two.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Christian Hewitt <christianshewitt at gmail.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-dreambox.dtsi"
> +
> +/ {
> +	compatible = "dream,dreambox-two", "amlogic,s922x", "amlogic,g12b";
> +	model = "Dreambox Two";
> +};
> +
> +&sd_emmc_a {
> +	sd-uhs-sdr12;
> +	sd-uhs-sdr25;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +};
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> new file mode 100644
> index 000000000000..a302b127f32a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-dreambox.dtsi
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2021 Christian Hewitt <christianshewitt at gmail.com>
> + */
> +
> +#include "meson-g12b-w400.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
> +
> +/ {
> +	cvbs-connector {
> +		status = "disabled";
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOA_11 GPIO_ACTIVE_LOW>;
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	spdif_dit: audio-codec-1 {
> +		#sound-dai-cells = <0>;
> +		compatible = "linux,spdif-dit";
> +		status = "okay";
> +		sound-name-prefix = "DIT";
> +	};
> +
> +	sound {
> +		compatible = "amlogic,axg-sound-card";
> +		model = "DREAMBOX";
> +		audio-aux-devs = <&tdmout_b>;
> +		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> +				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
> +				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
> +				"TDM_B Playback", "TDMOUT_B OUT",
> +				"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
> +				"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
> +				"SPDIFOUT_A IN 2", "FRDDR_C OUT 3";
> +
> +		dai-link-0 {
> +			sound-dai = <&frddr_a>;
> +		};
> +
> +		dai-link-1 {
> +			sound-dai = <&frddr_b>;
> +		};
> +
> +		dai-link-2 {
> +			sound-dai = <&frddr_c>;
> +		};
> +
> +		/* 8ch hdmi interface */
> +		dai-link-3 {
> +			sound-dai = <&tdmif_b>;
> +			dai-format = "i2s";
> +			dai-tdm-slot-tx-mask-0 = <1 1>;
> +			dai-tdm-slot-tx-mask-1 = <1 1>;
> +			dai-tdm-slot-tx-mask-2 = <1 1>;
> +			dai-tdm-slot-tx-mask-3 = <1 1>;
> +			mclk-fs = <256>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> +			};
> +		};
> +
> +		/* spdif hdmi or toslink interface */
> +		dai-link-4 {
> +			sound-dai = <&spdifout_a>;
> +
> +			codec-0 {
> +				sound-dai = <&spdif_dit>;
> +			};
> +
> +			codec-1 {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> +			};
> +		};
> +
> +		/* spdif hdmi interface */
> +		dai-link-5 {
> +			sound-dai = <&spdifout_b>;
> +
> +			codec {
> +				sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> +			};
> +		};
> +
> +		/* hdmi glue */
> +		dai-link-6 {
> +			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> +			codec {
> +				sound-dai = <&hdmi_tx>;
> +			};
> +		};
> +	};
> +};
> +
> +&arb {
> +	status = "okay";
> +};
> +
> +&clkc_audio {
> +	assigned-clocks = <&clkc CLKID_MPLL2>,
> +			  <&clkc CLKID_MPLL0>,
> +			  <&clkc CLKID_MPLL1>;
> +	assigned-clock-parents = <0>, <0>, <0>;
> +	assigned-clock-rates = <294912000>,
> +			       <270950400>,
> +			       <393216000>;
> +
> +	status = "okay";
> +};
> +
> +&frddr_a {
> +	status = "okay";
> +};
> +
> +&frddr_b {
> +	status = "okay";
> +};
> +
> +&frddr_c {
> +	status = "okay";
> +};
> +
> +&ir {
> +	linux,rc-map-name = "rc-dreambox";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddao_1v8>;
> +};
> +
> +&spdifout_a {
> +	pinctrl-0 = <&spdif_out_h_pins>;
> +	pinctrl-names = "default";
> +	status = "okay";
> +};
> +
> +&spdifout_b {
> +	status = "okay";
> +};
> +
> +&tdmif_b {
> +	status = "okay";
> +};
> +
> +&tdmout_b {
> +	status = "okay";
> +};
> +
> +&tohdmitx {
> +	status = "okay";
> +};

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>



More information about the linux-amlogic mailing list