[PATCH 2/2] arm64: dts: meson: add support for OSMC Vero 4K
Christian Hewitt
christianshewitt at gmail.com
Thu Jun 6 02:54:19 PDT 2024
The OSMC Vero 4K device is based on the Amlogic S905X (P212)
reference design with the following specifications:
- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)
Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
---
arch/arm64/boot/dts/amlogic/Makefile | 7 +
.../dts/amlogic/meson-gxl-s905x-vero4k.dts | 202 ++++++++++++++++++
2 files changed, 209 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 4addcae2c54e..78941ddd3136 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -55,6 +55,13 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-phicomm-n1.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-sml5442tw.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-vero4k-plus.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc-v2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-vero4k.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
new file mode 100644
index 000000000000..b325cd75a792
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-vero4k.dts
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2024 Christian Hewitt <christianshewitt at gmail.com>
+ */
+
+/dts-v1/;
+
+#include "meson-gxl-s905x-p212.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-aiu.h>
+
+/ {
+ compatible = "osmc,vero4k", "amlogic,s905x", "amlogic,meson-gxl";
+ model = "OSMC Vero 4K";
+
+ reserved-memory {
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+ secmon_reserved_bl32: secmon at 5300000 {
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-standby {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio GPIODV_24 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ panic-indicator;
+ };
+ };
+
+ dio2133: analog-amplifier {
+ compatible = "simple-audio-amplifier";
+ sound-name-prefix = "AU2";
+ VCC-supply = <&hdmi_5v>;
+ enable-gpios = <&gpio GPIOH_5 GPIO_ACTIVE_HIGH>;
+ };
+
+ spdif_dit: audio-codec-0 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ sound-name-prefix = "DIT";
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "amlogic,gx-sound-card";
+ model = "VERO4K";
+ audio-aux-devs = <&dio2133>;
+ audio-widgets = "Line", "Lineout";
+ audio-routing = "AU2 INL", "ACODEC LOLP",
+ "AU2 INR", "ACODEC LORP",
+ "AU2 INL", "ACODEC LOLN",
+ "AU2 INR", "ACODEC LORN",
+ "Lineout", "AU2 OUTL",
+ "Lineout", "AU2 OUTR";
+
+ dai-link-0 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
+ dai-format = "i2s";
+ mclk-fs = <256>;
+
+ codec-0 {
+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
+ };
+
+ codec-1 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_I2S>;
+ };
+ };
+
+ dai-link-3 {
+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+
+ dai-link-5 {
+ sound-dai = <&aiu AIU_ACODEC CTRL_OUT>;
+
+ codec-0 {
+ sound-dai = <&acodec>;
+ };
+ };
+ };
+};
+
+&acodec {
+ AVDD-supply = <&vddio_ao18>;
+ status = "okay";
+};
+
+&aiu {
+ status = "okay";
+ pinctrl-0 = <&spdif_out_h_pins>;
+ pinctrl-names = "default";
+};
+
+&cec_AO {
+ status = "okay";
+ pinctrl-0 = <&ao_cec_pins>;
+ pinctrl-names = "default";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&clkc {
+ assigned-clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_MPLL2>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+ðmac {
+ phy-mode = "rmii";
+ phy-handle = <&internal_phy>;
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&hdmi_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&internal_phy {
+ pinctrl-0 = <ð_link_led_pins>, <ð_act_led_pins>;
+ pinctrl-names = "default";
+};
+
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
+ status = "okay";
+};
--
2.34.1
More information about the linux-amlogic
mailing list