[PATCH v7 1/2] pwm: meson: Add support for Amlogic S4 PWM
Kelvin Zhang via B4 Relay
devnull+kelvin.zhang.amlogic.com at kernel.org
Tue Jun 4 19:44:55 PDT 2024
From: Junyi Zhao <junyi.zhao at amlogic.com>
Add support for Amlogic S4 PWM.
Signed-off-by: Junyi Zhao <junyi.zhao at amlogic.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang at amlogic.com>
---
drivers/pwm/pwm-meson.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index b2f97dfb01bb..4f01847525b2 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -460,6 +460,34 @@ static int meson_pwm_init_channels_meson8b_v2(struct pwm_chip *chip)
return meson_pwm_init_clocks_meson8b(chip, mux_parent_data);
}
+static void meson_pwm_s4_put_clk(void *data)
+{
+ struct clk *clk = data;
+
+ clk_put(clk);
+}
+
+static int meson_pwm_init_channels_s4(struct pwm_chip *chip)
+{
+ struct device *dev = pwmchip_parent(chip);
+ struct device_node *np = dev->of_node;
+ struct meson_pwm *meson = to_meson_pwm(chip);
+ int i, ret;
+
+ for (i = 0; i < MESON_NUM_PWMS; i++) {
+ meson->channels[i].clk = of_clk_get(np, i);
+ if (IS_ERR(meson->channels[i].clk)) {
+ ret = PTR_ERR(meson->channels[i].clk);
+ dev_err_probe(dev, ret, "Failed to get clk\n");
+ return ret;
+ }
+ devm_add_action_or_reset(dev, meson_pwm_s4_put_clk,
+ meson->channels[i].clk);
+ }
+
+ return 0;
+}
+
static const struct meson_pwm_data pwm_meson8b_data = {
.parent_names = { "xtal", NULL, "fclk_div4", "fclk_div3" },
.channels_init = meson_pwm_init_channels_meson8b_legacy,
@@ -498,6 +526,10 @@ static const struct meson_pwm_data pwm_meson8_v2_data = {
.channels_init = meson_pwm_init_channels_meson8b_v2,
};
+static const struct meson_pwm_data pwm_s4_data = {
+ .channels_init = meson_pwm_init_channels_s4,
+};
+
static const struct of_device_id meson_pwm_matches[] = {
{
.compatible = "amlogic,meson8-pwm-v2",
@@ -536,6 +568,10 @@ static const struct of_device_id meson_pwm_matches[] = {
.compatible = "amlogic,meson-g12a-ao-pwm-cd",
.data = &pwm_g12a_ao_cd_data
},
+ {
+ .compatible = "amlogic,meson-s4-pwm",
+ .data = &pwm_s4_data
+ },
{},
};
MODULE_DEVICE_TABLE(of, meson_pwm_matches);
--
2.37.1
More information about the linux-amlogic
mailing list