[PATCH 2/2] iio: adc: meson: add support for the GXLX SoC
Christian Hewitt
christianshewitt at gmail.com
Mon Jun 3 22:54:31 PDT 2024
From: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
The SARADC IP on GXLX is identical to the one found on GXL SoCs: except
GXLX requires poking the first three bits in the MESON_SAR_ADC_REG12
register to get the three MPLL clocks (used as clock generators for the
audio frequencies) to work. Register bits are from the vendor kernel.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
---
drivers/iio/adc/meson_saradc.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 13b473d8c6c7..200eb8271617 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -160,6 +160,11 @@
#define MESON_SAR_ADC_REG11_EOC BIT(1)
#define MESON_SAR_ADC_REG11_VREF_SEL BIT(0)
+#define MESON_SAR_ADC_REG12 0x30
+ #define MESON_SAR_ADC_REG12_MPLL0_UNKNOWN BIT(0)
+ #define MESON_SAR_ADC_REG12_MPLL1_UNKNOWN BIT(1)
+ #define MESON_SAR_ADC_REG12_MPLL2_UNKNOWN BIT(2)
+
#define MESON_SAR_ADC_REG13 0x34
#define MESON_SAR_ADC_REG13_12BIT_CALIBRATION_MASK GENMASK(13, 8)
@@ -327,6 +332,7 @@ struct meson_sar_adc_param {
u8 vref_select;
u8 cmv_select;
u8 adc_eoc;
+ bool mpll_clock_bits;
enum meson_sar_adc_vref_sel vref_volatge;
};
@@ -1009,6 +1015,12 @@ static int meson_sar_adc_init(struct iio_dev *indio_dev)
priv->param->cmv_select);
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
MESON_SAR_ADC_REG11_CMV_SEL, regval);
+
+ if (priv->param->mpll_clock_bits)
+ regmap_write(priv->regmap, MESON_SAR_ADC_REG12,
+ MESON_SAR_ADC_REG12_MPLL0_UNKNOWN |
+ MESON_SAR_ADC_REG12_MPLL1_UNKNOWN |
+ MESON_SAR_ADC_REG12_MPLL2_UNKNOWN);
}
ret = clk_set_parent(priv->adc_sel_clk, priv->clkin);
@@ -1241,6 +1253,17 @@ static const struct meson_sar_adc_param meson_sar_adc_gxl_param = {
.cmv_select = 1,
};
+static const struct meson_sar_adc_param meson_sar_adc_gxlx_param = {
+ .has_bl30_integration = true,
+ .clock_rate = 1200000,
+ .regmap_config = &meson_sar_adc_regmap_config_gxbb,
+ .resolution = 12,
+ .disable_ring_counter = 1,
+ .vref_voltage = VREF_VOLTAGE_1V8,
+ .cmv_select = true,
+ .mpll_clock_bits = true,
+};
+
static const struct meson_sar_adc_param meson_sar_adc_axg_param = {
.has_bl30_integration = true,
.clock_rate = 1200000,
@@ -1293,6 +1316,11 @@ static const struct meson_sar_adc_data meson_sar_adc_gxl_data = {
.name = "meson-gxl-saradc",
};
+static const struct meson_sar_adc_data meson_sar_adc_gxlx_data = {
+ .param = &meson_sar_adc_gxlx_param,
+ .name = "meson-gxlx-saradc",
+};
+
static const struct meson_sar_adc_data meson_sar_adc_gxm_data = {
.param = &meson_sar_adc_gxl_param,
.name = "meson-gxm-saradc",
@@ -1324,6 +1352,9 @@ static const struct of_device_id meson_sar_adc_of_match[] = {
}, {
.compatible = "amlogic,meson-gxl-saradc",
.data = &meson_sar_adc_gxl_data,
+ }, {
+ .compatible = "amlogic,meson-gxlx-saradc",
+ .data = &meson_sar_adc_gxlx_data,
}, {
.compatible = "amlogic,meson-gxm-saradc",
.data = &meson_sar_adc_gxm_data,
--
2.34.1
More information about the linux-amlogic
mailing list