[PATCH v3 4/6] arm64: dts: amlogic: c3: add ao secure node

[Xianwei Zhao via B4 Relay]

From: Xianwei Zhao <xianwei.zhao at amlogic.com>

Add node for board info registers, which allows getting SoC family and
board revision.

For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic C3 SoC:
soc soc0: Amlogic C3 (C308L) Revision 3d:a (1:1) Detected

Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index f8fb060c49ae..c913dd409e64 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -129,6 +129,13 @@ uart_b: serial at 7a000 {
 				clock-names = "xtal", "pclk", "baud";
 			};
 
+			sec_ao: ao-secure at 10220 {
+				compatible = "amlogic,c3-ao-secure",
+					     "amlogic,meson-gx-ao-secure",
+					     "syscon";
+				reg = <0x0 0x10220 0x0 0x140>;
+				amlogic,has-chip-id;
+			};
 		};
 	};
 };

-- 
2.37.1