[PATCH v1 00/24] Support more Amlogic SoC families in crypto driver

[neil.armstrong at linaro.org]

Hi !

On 10/01/2024 21:11, Alexey Romanov wrote:
> Hello!
> 
> This patchset expand the funcionality of the Amlogic
> crypto driver by adding support for more SoC families:
> AXG, G12A, G12B, SM1, A1, S4.
> 
> Also specify and enable crypto node in device tree
> for reference Amlogic devices.
> 
> Tested on AXG, G12A/B, SM1, A1 and S4 devices via
> custom tests and trcypt module.

Thanks a lot for the patchset, it's very welcome!

Could you provide some procedure used to test and test dumps for all the platforms, like `cryptsetup benchmark` or a summary of tcrypt tests output ?

Thanks,
Neil

> 
> Alexey Romanov (17):
>    drivers: crypto: meson: don't hardcode IRQ count
>    drivers: crypto: meson: make CLK controller optional
>    drviers: crypto: meson: add platform data
>    drivers: crypto: meson: add MMIO helpers
>    drivers: crypto: meson: move get_engine_number()
>    drivers: crypto: meson: use fallback for 192-bit keys
>    drivers: crypto: meson: add support for G12-series
>    drivers: crypto: meson: add support for AXG-series
>    dt-bindings: crypto: meson: add new compatibles
>    arch: arm64: dts: meson: a1: add crypto node
>    arch: arm64: dts: meson: s4: add crypto node
>    arch: arm64: dts: meson: g12: add crypto node
>    arch: arm64: dts: meson: axg: add crypto node
>    arch: arm64: dts: meson: s4-s805x2-aq222: enable crypto node
>    arch: arm64: dts: meson: a1-ad401: enable crypto node
>    arch: arm64: dts: meson: axg-s400: enable crypto node
>    arch: arm64: dts: meson: g12a-u200: enable crypto node
> 
> Jan Dakinevich (7):
>    drivers: crypto: meson: drop status field from meson_flow
>    drivers: crypto: meson: move algs definition and cipher API to
>      cipher.c
>    drivers: crypto: meson: cleanup defines
>    drivers: crypto: meson: process more than MAXDESCS descriptors
>    drivers: crypto: meson: avoid kzalloc in engine thread
>    drivers: crypto: meson: introduce hasher
>    drivers: crypto: meson: add support for AES-CTR
> 
>   .../bindings/crypto/amlogic,gxl-crypto.yaml   |   2 +
>   .../arm64/boot/dts/amlogic/meson-a1-ad401.dts |   4 +
>   arch/arm64/boot/dts/amlogic/meson-a1.dtsi     |   8 +
>   .../arm64/boot/dts/amlogic/meson-axg-s400.dts |   4 +
>   arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |   7 +
>   .../boot/dts/amlogic/meson-g12-common.dtsi    |   7 +
>   .../boot/dts/amlogic/meson-g12a-u200.dts      |   4 +
>   .../dts/amlogic/meson-s4-s805x2-aq222.dts     |   4 +
>   arch/arm64/boot/dts/amlogic/meson-s4.dtsi     |   7 +
>   drivers/crypto/amlogic/Makefile               |   2 +-
>   drivers/crypto/amlogic/amlogic-gxl-cipher.c   | 591 ++++++++++++------
>   drivers/crypto/amlogic/amlogic-gxl-core.c     | 260 ++++----
>   drivers/crypto/amlogic/amlogic-gxl-hasher.c   | 448 +++++++++++++
>   drivers/crypto/amlogic/amlogic-gxl.h          | 116 +++-
>   14 files changed, 1135 insertions(+), 329 deletions(-)
>   create mode 100644 drivers/crypto/amlogic/amlogic-gxl-hasher.c
>