[PATCH 1/6] ASoC: meson: axg-tdm-interface: fix mclk setup without mclk-fs
Jerome Brunet
jbrunet at baylibre.com
Fri Feb 23 09:51:07 PST 2024
By default, when mclk-fs is not provided, the tdm-interface driver
requests an MCLK that is 4x the bit clock, SCLK.
However there is no justification for this:
* If the codec needs MCLK for its operation, mclk-fs is expected to be set
according to the codec requirements.
* If the codec does not need MCLK the minimum is 2 * SCLK, because this is
minimum the divider between SCLK and MCLK can do.
Multiplying by 4 may cause problems because the PLL limit may be reached
sooner than it should, so use 2x instead.
Fixes: d60e4f1e4be5 ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
sound/soc/meson/axg-tdm-interface.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/meson/axg-tdm-interface.c b/sound/soc/meson/axg-tdm-interface.c
index 1c3d433cefd2..cd5168e826df 100644
--- a/sound/soc/meson/axg-tdm-interface.c
+++ b/sound/soc/meson/axg-tdm-interface.c
@@ -264,8 +264,8 @@ static int axg_tdm_iface_set_sclk(struct snd_soc_dai *dai,
srate = iface->slots * iface->slot_width * params_rate(params);
if (!iface->mclk_rate) {
- /* If no specific mclk is requested, default to bit clock * 4 */
- clk_set_rate(iface->mclk, 4 * srate);
+ /* If no specific mclk is requested, default to bit clock * 2 */
+ clk_set_rate(iface->mclk, 2 * srate);
} else {
/* Check if we can actually get the bit clock from mclk */
if (iface->mclk_rate % srate) {
--
2.43.0
More information about the linux-amlogic
mailing list