[PATCH v3 06/24] media: platform: switch to use of_graph_get_next_device_endpoint()
Rob Herring
robh at kernel.org
Fri Feb 2 09:56:22 PST 2024
On Wed, Jan 31, 2024 at 05:05:34AM +0000, Kuninori Morimoto wrote:
> of_graph_get_next_endpoint() is now renamed to
> of_graph_get_next_device_endpoint(). Switch to it.
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx at renesas.com>
> ---
> drivers/media/platform/atmel/atmel-isi.c | 4 ++--
> drivers/media/platform/intel/pxa_camera.c | 2 +-
> drivers/media/platform/microchip/microchip-sama5d2-isc.c | 2 +-
> drivers/media/platform/microchip/microchip-sama7g5-isc.c | 2 +-
> drivers/media/platform/qcom/camss/camss.c | 2 +-
> drivers/media/platform/renesas/renesas-ceu.c | 2 +-
> drivers/media/platform/samsung/exynos4-is/fimc-is.c | 2 +-
> drivers/media/platform/samsung/exynos4-is/mipi-csis.c | 2 +-
> drivers/media/platform/st/stm32/stm32-dcmi.c | 4 ++--
> drivers/media/platform/ti/am437x/am437x-vpfe.c | 2 +-
> drivers/media/platform/ti/davinci/vpif.c | 3 +--
> drivers/media/platform/ti/davinci/vpif_capture.c | 3 +--
> drivers/media/platform/video-mux.c | 2 +-
> drivers/media/platform/xilinx/xilinx-vipp.c | 2 +-
> 14 files changed, 16 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
> index 4046212d48b4..4317750d05ad 100644
> --- a/drivers/media/platform/atmel/atmel-isi.c
> +++ b/drivers/media/platform/atmel/atmel-isi.c
> @@ -831,7 +831,7 @@ static int atmel_isi_parse_dt(struct atmel_isi *isi,
> isi->pdata.full_mode = 1;
> isi->pdata.frate = ISI_CFG1_FRATE_CAPTURE_ALL;
>
> - np = of_graph_get_next_endpoint(np, NULL);
> + np = of_graph_get_next_device_endpoint(np, NULL);
Same comment on using of_graph_get_endpoint_by_regs().
> if (!np) {
> dev_err(&pdev->dev, "Could not find the endpoint\n");
> return -EINVAL;
> @@ -1155,7 +1155,7 @@ static int isi_graph_init(struct atmel_isi *isi)
> struct device_node *ep;
> int ret;
>
> - ep = of_graph_get_next_endpoint(isi->dev->of_node, NULL);
> + ep = of_graph_get_next_device_endpoint(isi->dev->of_node, NULL);
> if (!ep)
> return -EINVAL;
>
> diff --git a/drivers/media/platform/intel/pxa_camera.c b/drivers/media/platform/intel/pxa_camera.c
> index 59b89e421dc2..f2175c03502b 100644
> --- a/drivers/media/platform/intel/pxa_camera.c
> +++ b/drivers/media/platform/intel/pxa_camera.c
> @@ -2207,7 +2207,7 @@ static int pxa_camera_pdata_from_dt(struct device *dev,
> pcdev->mclk = mclk_rate;
> }
>
> - np = of_graph_get_next_endpoint(np, NULL);
> + np = of_graph_get_next_device_endpoint(np, NULL);
> if (!np) {
> dev_err(dev, "could not find endpoint\n");
> return -EINVAL;
> diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> index 5ac149cf3647..201049c047b0 100644
> --- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> +++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
> @@ -363,7 +363,7 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
> while (1) {
> struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
>
> - epn = of_graph_get_next_endpoint(np, epn);
> + epn = of_graph_get_next_device_endpoint(np, epn);
Looks like this should use the iterator?
> if (!epn)
> return 0;
>
> diff --git a/drivers/media/platform/microchip/microchip-sama7g5-isc.c b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
> index 73445f33d26b..b617a9bcd398 100644
> --- a/drivers/media/platform/microchip/microchip-sama7g5-isc.c
> +++ b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
> @@ -349,7 +349,7 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
> while (1) {
> struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
>
> - epn = of_graph_get_next_endpoint(np, epn);
> + epn = of_graph_get_next_device_endpoint(np, epn);
> if (!epn)
> return 0;
>
> diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
> index 8e78dd8d5961..cbb6f88cfe4a 100644
> --- a/drivers/media/platform/qcom/camss/camss.c
> +++ b/drivers/media/platform/qcom/camss/camss.c
> @@ -1136,7 +1136,7 @@ static int camss_of_parse_ports(struct camss *camss)
> struct device_node *remote = NULL;
> int ret, num_subdevs = 0;
>
> - for_each_endpoint_of_node(dev->of_node, node) {
> + for_each_device_endpoint_of_node(dev->of_node, node) {
> struct camss_async_subdev *csd;
>
> if (!of_device_is_available(node))
> diff --git a/drivers/media/platform/renesas/renesas-ceu.c b/drivers/media/platform/renesas/renesas-ceu.c
> index 2562b30acfb9..929d17de4ac9 100644
> --- a/drivers/media/platform/renesas/renesas-ceu.c
> +++ b/drivers/media/platform/renesas/renesas-ceu.c
> @@ -1526,7 +1526,7 @@ static int ceu_parse_dt(struct ceu_device *ceudev)
> int num_ep;
> int ret;
>
> - num_ep = of_graph_get_endpoint_count(of);
> + num_ep = of_graph_get_device_endpoint_count(of);
> if (!num_ep)
> return -ENODEV;
>
> diff --git a/drivers/media/platform/samsung/exynos4-is/fimc-is.c b/drivers/media/platform/samsung/exynos4-is/fimc-is.c
> index a08c87ef6e2d..5ab0399b7718 100644
> --- a/drivers/media/platform/samsung/exynos4-is/fimc-is.c
> +++ b/drivers/media/platform/samsung/exynos4-is/fimc-is.c
> @@ -175,7 +175,7 @@ static int fimc_is_parse_sensor_config(struct fimc_is *is, unsigned int index,
> return -EINVAL;
> }
>
> - ep = of_graph_get_next_endpoint(node, NULL);
> + ep = of_graph_get_next_device_endpoint(node, NULL);
> if (!ep)
> return -ENXIO;
>
> diff --git a/drivers/media/platform/samsung/exynos4-is/mipi-csis.c b/drivers/media/platform/samsung/exynos4-is/mipi-csis.c
> index 686ca8753ba2..a332b4bd76f2 100644
> --- a/drivers/media/platform/samsung/exynos4-is/mipi-csis.c
> +++ b/drivers/media/platform/samsung/exynos4-is/mipi-csis.c
> @@ -728,7 +728,7 @@ static int s5pcsis_parse_dt(struct platform_device *pdev,
> &state->max_num_lanes))
> return -EINVAL;
>
> - node = of_graph_get_next_endpoint(node, NULL);
> + node = of_graph_get_next_device_endpoint(node, NULL);
> if (!node) {
> dev_err(&pdev->dev, "No port node at %pOF\n",
> pdev->dev.of_node);
> diff --git a/drivers/media/platform/st/stm32/stm32-dcmi.c b/drivers/media/platform/st/stm32/stm32-dcmi.c
> index 8cb4fdcae137..320101f4ad40 100644
> --- a/drivers/media/platform/st/stm32/stm32-dcmi.c
> +++ b/drivers/media/platform/st/stm32/stm32-dcmi.c
> @@ -1856,7 +1856,7 @@ static int dcmi_graph_init(struct stm32_dcmi *dcmi)
> struct device_node *ep;
> int ret;
>
> - ep = of_graph_get_next_endpoint(dcmi->dev->of_node, NULL);
> + ep = of_graph_get_next_device_endpoint(dcmi->dev->of_node, NULL);
> if (!ep) {
> dev_err(dcmi->dev, "Failed to get next endpoint\n");
> return -EINVAL;
> @@ -1915,7 +1915,7 @@ static int dcmi_probe(struct platform_device *pdev)
> "Could not get reset control\n");
>
> /* Get bus characteristics from devicetree */
> - np = of_graph_get_next_endpoint(np, NULL);
> + np = of_graph_get_next_device_endpoint(np, NULL);
> if (!np) {
> dev_err(&pdev->dev, "Could not find the endpoint\n");
> return -ENODEV;
> diff --git a/drivers/media/platform/ti/am437x/am437x-vpfe.c b/drivers/media/platform/ti/am437x/am437x-vpfe.c
> index 5fa2ea9025d9..46876865ec6a 100644
> --- a/drivers/media/platform/ti/am437x/am437x-vpfe.c
> +++ b/drivers/media/platform/ti/am437x/am437x-vpfe.c
> @@ -2309,7 +2309,7 @@ vpfe_get_pdata(struct vpfe_device *vpfe)
> struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
> struct device_node *rem;
>
> - endpoint = of_graph_get_next_endpoint(dev->of_node, endpoint);
> + endpoint = of_graph_get_next_device_endpoint(dev->of_node, endpoint);
> if (!endpoint)
> break;
>
> diff --git a/drivers/media/platform/ti/davinci/vpif.c b/drivers/media/platform/ti/davinci/vpif.c
> index 63cdfed37bc9..021ca79e832b 100644
> --- a/drivers/media/platform/ti/davinci/vpif.c
> +++ b/drivers/media/platform/ti/davinci/vpif.c
> @@ -465,8 +465,7 @@ static int vpif_probe(struct platform_device *pdev)
> * so their devices need to be registered manually here
> * for their legacy platform_drivers to work.
> */
> - endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
> - endpoint);
> + endpoint = of_graph_get_next_device_endpoint(pdev->dev.of_node, endpoint);
> if (!endpoint)
> return 0;
> of_node_put(endpoint);
> diff --git a/drivers/media/platform/ti/davinci/vpif_capture.c b/drivers/media/platform/ti/davinci/vpif_capture.c
> index 99fae8830c41..805c313b41dc 100644
> --- a/drivers/media/platform/ti/davinci/vpif_capture.c
> +++ b/drivers/media/platform/ti/davinci/vpif_capture.c
> @@ -1521,8 +1521,7 @@ vpif_capture_get_pdata(struct platform_device *pdev,
> unsigned int flags;
> int err;
>
> - endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
> - endpoint);
> + endpoint = of_graph_get_next_device_endpoint(pdev->dev.of_node, endpoint);
> if (!endpoint)
> break;
>
> diff --git a/drivers/media/platform/video-mux.c b/drivers/media/platform/video-mux.c
> index 5de6b6694f53..61d84ade7155 100644
> --- a/drivers/media/platform/video-mux.c
> +++ b/drivers/media/platform/video-mux.c
> @@ -408,7 +408,7 @@ static int video_mux_probe(struct platform_device *pdev)
> * The largest numbered port is the output port. It determines
> * total number of pads.
> */
> - for_each_endpoint_of_node(np, ep) {
> + for_each_device_endpoint_of_node(np, ep) {
> struct of_endpoint endpoint;
>
> of_graph_parse_endpoint(ep, &endpoint);
> diff --git a/drivers/media/platform/xilinx/xilinx-vipp.c b/drivers/media/platform/xilinx/xilinx-vipp.c
> index 996684a73038..9230931d6d7a 100644
> --- a/drivers/media/platform/xilinx/xilinx-vipp.c
> +++ b/drivers/media/platform/xilinx/xilinx-vipp.c
> @@ -207,7 +207,7 @@ static int xvip_graph_build_dma(struct xvip_composite_device *xdev)
>
> while (1) {
> /* Get the next endpoint and parse its link. */
> - ep = of_graph_get_next_endpoint(node, ep);
> + ep = of_graph_get_next_device_endpoint(node, ep);
The rest of this file uses fwnode versions including the very next
function. This should be fwnode_graph_get_next_endpoint(). But then it's
a loop, so should be a loop iterator instead.
Rob
More information about the linux-amlogic
mailing list