[PATCH v5 4/5] pwm: meson: don't carry internal clock elements around
Jerome Brunet
jbrunet at baylibre.com
Wed Feb 21 07:11:50 PST 2024
Pointers to the internal clock elements of the PWM are useless
after probe. There is no need to carry this around in the device
data.
Rework the clock registration to let devres deal with it
Signed-off-by: Jerome Brunet <jbrunet at baylibre.com>
---
drivers/pwm/pwm-meson.c | 73 ++++++++++++++++++++++-------------------
1 file changed, 40 insertions(+), 33 deletions(-)
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index a02fdbc61256..fe61335d87d0 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -85,14 +85,17 @@ static struct meson_pwm_channel_data {
}
};
+struct meson8b_pwm_clocks {
+ struct clk_divider div;
+ struct clk_gate gate;
+ struct clk_mux mux;
+};
+
struct meson_pwm_channel {
unsigned long rate;
unsigned int hi;
unsigned int lo;
- struct clk_mux mux;
- struct clk_divider div;
- struct clk_gate gate;
struct clk *clk;
};
@@ -419,9 +422,14 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
for (i = 0; i < chip->npwm; i++) {
struct meson_pwm_channel *channel = &meson->channels[i];
- struct clk_parent_data div_parent = {}, gate_parent = {};
+ struct clk_parent_data pdata = {};
+ struct meson8b_pwm_clocks *clks;
struct clk_init_data init = {};
+ clks = devm_kzalloc(dev, sizeof(*clks), GFP_KERNEL);
+ if (!clks)
+ return -ENOMEM;
+
snprintf(name, sizeof(name), "%s#mux%u", dev_name(dev), i);
init.name = name;
@@ -430,16 +438,15 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.parent_data = mux_parent_data;
init.num_parents = MESON_NUM_MUX_PARENTS;
- channel->mux.reg = meson->base + REG_MISC_AB;
- channel->mux.shift =
- meson_pwm_per_channel_data[i].clk_sel_shift;
- channel->mux.mask = MISC_CLK_SEL_MASK;
- channel->mux.flags = 0;
- channel->mux.lock = &meson->lock;
- channel->mux.table = NULL;
- channel->mux.hw.init = &init;
+ clks->mux.reg = meson->base + REG_MISC_AB;
+ clks->mux.shift = meson_pwm_per_channel_data[i].clk_sel_shift;
+ clks->mux.mask = MISC_CLK_SEL_MASK;
+ clks->mux.flags = 0;
+ clks->mux.lock = &meson->lock;
+ clks->mux.table = NULL;
+ clks->mux.hw.init = &init;
- err = devm_clk_hw_register(dev, &channel->mux.hw);
+ err = devm_clk_hw_register(dev, &clks->mux.hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
@@ -449,19 +456,19 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.name = name;
init.ops = &clk_divider_ops;
init.flags = CLK_SET_RATE_PARENT;
- div_parent.index = -1;
- div_parent.hw = &channel->mux.hw;
- init.parent_data = &div_parent;
+ pdata.index = -1;
+ pdata.hw = &clks->mux.hw;
+ init.parent_data = &pdata;
init.num_parents = 1;
- channel->div.reg = meson->base + REG_MISC_AB;
- channel->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
- channel->div.width = MISC_CLK_DIV_WIDTH;
- channel->div.hw.init = &init;
- channel->div.flags = 0;
- channel->div.lock = &meson->lock;
+ clks->div.reg = meson->base + REG_MISC_AB;
+ clks->div.shift = meson_pwm_per_channel_data[i].clk_div_shift;
+ clks->div.width = MISC_CLK_DIV_WIDTH;
+ clks->div.hw.init = &init;
+ clks->div.flags = 0;
+ clks->div.lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->div.hw);
+ err = devm_clk_hw_register(dev, &clks->div.hw);
if (err)
return dev_err_probe(dev, err,
"failed to register %s\n", name);
@@ -471,22 +478,22 @@ static int meson_pwm_init_channels(struct pwm_chip *chip)
init.name = name;
init.ops = &clk_gate_ops;
init.flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED;
- gate_parent.index = -1;
- gate_parent.hw = &channel->div.hw;
- init.parent_data = &gate_parent;
+ pdata.index = -1;
+ pdata.hw = &clks->div.hw;
+ init.parent_data = &pdata;
init.num_parents = 1;
- channel->gate.reg = meson->base + REG_MISC_AB;
- channel->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
- channel->gate.hw.init = &init;
- channel->gate.flags = 0;
- channel->gate.lock = &meson->lock;
+ clks->gate.reg = meson->base + REG_MISC_AB;
+ clks->gate.bit_idx = meson_pwm_per_channel_data[i].clk_en_shift;
+ clks->gate.hw.init = &init;
+ clks->gate.flags = 0;
+ clks->gate.lock = &meson->lock;
- err = devm_clk_hw_register(dev, &channel->gate.hw);
+ err = devm_clk_hw_register(dev, &clks->gate.hw);
if (err)
return dev_err_probe(dev, err, "failed to register %s\n", name);
- channel->clk = devm_clk_hw_get_clk(dev, &channel->gate.hw, NULL);
+ channel->clk = devm_clk_hw_get_clk(dev, &clks->gate.hw, NULL);
if (IS_ERR(channel->clk))
return dev_err_probe(dev, PTR_ERR(channel->clk),
"failed to register %s\n", name);
--
2.43.0
More information about the linux-amlogic
mailing list