[net-next RFC PATCH 3/3] net: phy: bcm7xxx: use common OPs for PHYs where possible
Christian Marangi
ansuelsmth at gmail.com
Sat Feb 17 11:41:14 PST 2024
Group common OPs for PHY, make them static and reference these
statically link OPs table instead of duplicating them for each PHY.
Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
drivers/net/phy/bcm7xxx.c | 80 +++++++++++++++++++++------------------
1 file changed, 44 insertions(+), 36 deletions(-)
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index c820a94b30a4..adfe364846dd 100644
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -840,6 +840,17 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
return ret;
}
+static const struct phy_driver_ops bcm7xxx_28nm_gpy_ops = {
+ .config_init = bcm7xxx_28nm_config_init,
+ .resume = bcm7xxx_28nm_resume,
+ .get_tunable = bcm7xxx_28nm_get_tunable,
+ .set_tunable = bcm7xxx_28nm_set_tunable,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+};
+
#define BCM7XXX_28NM_GPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -847,18 +858,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_GBIT_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .config_init = bcm7xxx_28nm_config_init, \
- .resume = bcm7xxx_28nm_resume, \
- .get_tunable = bcm7xxx_28nm_get_tunable, \
- .set_tunable = bcm7xxx_28nm_set_tunable, \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- }, \
+ .ops = &bcm7xxx_28nm_gpy_ops, \
}
+static const struct phy_driver_ops bcm7xxx_28nm_ephy_ops = {
+ .config_init = bcm7xxx_28nm_ephy_config_init,
+ .resume = bcm7xxx_28nm_ephy_resume,
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+ .read_mmd = bcm7xxx_28nm_ephy_read_mmd,
+ .write_mmd = bcm7xxx_28nm_ephy_write_mmd,
+};
+
#define BCM7XXX_28NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -866,18 +879,16 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .config_init = bcm7xxx_28nm_ephy_config_init, \
- .resume = bcm7xxx_28nm_ephy_resume, \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- .read_mmd = bcm7xxx_28nm_ephy_read_mmd, \
- .write_mmd = bcm7xxx_28nm_ephy_write_mmd, \
- }, \
+ .ops = &bcm7xxx_28nm_ephy_ops, \
}
+static const struct phy_driver_ops bcm7xxx_40nm_ephy_ops = {
+ .soft_reset = genphy_soft_reset,
+ .config_init = bcm7xxx_config_init,
+ .suspend = bcm7xxx_suspend,
+ .resume = bcm7xxx_config_init,
+};
+
#define BCM7XXX_40NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -885,14 +896,20 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .soft_reset = genphy_soft_reset, \
- .config_init = bcm7xxx_config_init, \
- .suspend = bcm7xxx_suspend, \
- .resume = bcm7xxx_config_init, \
- }, \
+ .ops = &bcm7xxx_40nm_ephy_ops, \
}
+static const struct phy_driver_ops bcm7xxx_16nm_ephy_ops = {
+ .get_sset_count = bcm_phy_get_sset_count,
+ .get_strings = bcm_phy_get_strings,
+ .get_stats = bcm7xxx_28nm_get_phy_stats,
+ .probe = bcm7xxx_28nm_probe,
+ .config_init = bcm7xxx_16nm_ephy_config_init,
+ .config_aneg = genphy_config_aneg,
+ .read_status = genphy_read_status,
+ .resume = bcm7xxx_16nm_ephy_resume,
+};
+
#define BCM7XXX_16NM_EPHY(_oui, _name) \
{ \
.phy_id = (_oui), \
@@ -900,16 +917,7 @@ static int bcm7xxx_28nm_probe(struct phy_device *phydev)
.name = _name, \
/* PHY_BASIC_FEATURES */ \
.flags = PHY_IS_INTERNAL, \
- .ops = &(const struct phy_driver_ops){ \
- .get_sset_count = bcm_phy_get_sset_count, \
- .get_strings = bcm_phy_get_strings, \
- .get_stats = bcm7xxx_28nm_get_phy_stats, \
- .probe = bcm7xxx_28nm_probe, \
- .config_init = bcm7xxx_16nm_ephy_config_init, \
- .config_aneg = genphy_config_aneg, \
- .read_status = genphy_read_status, \
- .resume = bcm7xxx_16nm_ephy_resume, \
- }, \
+ .ops = &bcm7xxx_16nm_ephy_ops, \
}
static struct phy_driver bcm7xxx_driver[] = {
--
2.43.0
More information about the linux-amlogic
mailing list