[PATCH v2 4/4] arm64: dts: amlogic: add fbx8am DT overlays
Marc Gonzalez
mgonzalez at freebox.fr
Tue Feb 13 06:58:03 PST 2024
On 13/02/2024 14:51, Rob Herring wrote:
> On Mon, Feb 12, 2024 at 06:53:01PM +0100, Marc Gonzalez wrote:
>
>> From: Pierre-Hugues Husson <phhusson at freebox.fr>
>>
>> Add support for two variants of the fbx8am board.
>>
>> Signed-off-by: Pierre-Hugues Husson <phhusson at freebox.fr>
>> Signed-off-by: Marc Gonzalez <mgonzalez at freebox.fr>
>> ---
>> arch/arm64/boot/dts/amlogic/Makefile | 7 +++++++
>> arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-brcm.dtso | 35 ++++++++++++++++++++++++++++++++++
>> arch/arm64/boot/dts/amlogic/meson-g12a-fbx8am-realtek.dtso | 25 ++++++++++++++++++++++++
>> 3 files changed, 67 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
>> index e9baa2cf02273..2fd7c7a18126f 100644
>> --- a/arch/arm64/boot/dts/amlogic/Makefile
>> +++ b/arch/arm64/boot/dts/amlogic/Makefile
>> @@ -81,3 +81,10 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
>> dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
>> +
>> +# Overlays
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-brcm.dtbo
>> +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-fbx8am-realtek.dtbo
>> +
>> +# Enable support for DT overlays
>> +DTC_FLAGS_meson-g12a-fbx8am += -@
>
> Overlays need to be applied to something in the kernel at build time.
> Applying is done the same way as composing object files for modules.
Hello Rob,
I don't quite understand your remark.
I copied what other platforms do:
$ git grep DTC_FLAGS_ arch/arm64/boot/dts/
arch/arm64/boot/dts/amlogic/Makefile:DTC_FLAGS_meson-g12a-fbx8am += -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra210-p2371-2180 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra210-p3450-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra186-p2771-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra186-p3509-0000+p3636-0001 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra194-p2972-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra194-p3509-0000+p3668-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra194-p3509-0000+p3668-0001 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra234-p3737-0000+p3701-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra234-p3740-0002+p3701-0008 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra234-p3768-0000+p3767-0000 := -@
arch/arm64/boot/dts/nvidia/Makefile:DTC_FLAGS_tegra234-p3768-0000+p3767-0005 := -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am625-beagleplay += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am625-sk += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am62-lp-sk += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am62a7-sk += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am642-tqma64xxl-mbax4xxl += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-am6548-iot2050-advanced-m2 += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-j721e-common-proc-board += -@
arch/arm64/boot/dts/ti/Makefile:DTC_FLAGS_k3-j721s2-common-proc-board += -@
Are you saying that is NOT the way it should be done?
Regards
More information about the linux-amlogic
mailing list