[PATCH v2 03/20] drviers: crypto: meson: add platform data

[Alexey Romanov]

Hello,

On Wed, Jan 24, 2024 at 08:30:48AM +0100, Corentin Labbe wrote:
> Le Tue, Jan 23, 2024 at 07:58:14PM +0300, Alexey Romanov a 'ecrit :
> > To support other Amlogic SoC's we have to
> > use platform data: descriptors and status registers
> > offsets are individual for each SoC series.
> > 
> > Signed-off-by: Alexey Romanov <avromanov at salutedevices.com>
> > ---
> >  drivers/crypto/amlogic/amlogic-gxl-cipher.c |  2 +-
> >  drivers/crypto/amlogic/amlogic-gxl-core.c   | 31 +++++++++++++++------
> >  drivers/crypto/amlogic/amlogic-gxl.h        | 11 ++++++++
> >  3 files changed, 35 insertions(+), 9 deletions(-)
> > 
> > diff --git a/drivers/crypto/amlogic/amlogic-gxl-cipher.c b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
> > index b19032f92415..7eff3ae7356f 100644
> > --- a/drivers/crypto/amlogic/amlogic-gxl-cipher.c
> > +++ b/drivers/crypto/amlogic/amlogic-gxl-cipher.c
> > @@ -225,7 +225,7 @@ static int meson_cipher(struct skcipher_request *areq)
> >  
> >  	reinit_completion(&mc->chanlist[flow].complete);
> >  	mc->chanlist[flow].status = 0;
> > -	writel(mc->chanlist[flow].t_phy | 2, mc->base + (flow << 2));
> > +	writel(mc->chanlist[flow].t_phy | 2, mc->base + ((mc->pdata->descs_reg + flow) << 2));
> >  	wait_for_completion_interruptible_timeout(&mc->chanlist[flow].complete,
> >  						  msecs_to_jiffies(500));
> >  	if (mc->chanlist[flow].status == 0) {
> > diff --git a/drivers/crypto/amlogic/amlogic-gxl-core.c b/drivers/crypto/amlogic/amlogic-gxl-core.c
> > index a58644be76e9..2be381e157c4 100644
> > --- a/drivers/crypto/amlogic/amlogic-gxl-core.c
> > +++ b/drivers/crypto/amlogic/amlogic-gxl-core.c
> > @@ -18,6 +18,7 @@
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> > +#include <linux/of_device.h>
> >  #include <linux/platform_device.h>
> >  
> >  #include "amlogic-gxl.h"
> > @@ -30,9 +31,10 @@ static irqreturn_t meson_irq_handler(int irq, void *data)
> >  
> >  	for (flow = 0; flow < mc->flow_cnt; flow++) {
> >  		if (mc->chanlist[flow].irq == irq) {
> > -			p = readl(mc->base + ((0x04 + flow) << 2));
> > +			p = readl(mc->base + ((mc->pdata->status_reg + flow) << 2));
> >  			if (p) {
> > -				writel_relaxed(0xF, mc->base + ((0x4 + flow) << 2));
> > +				writel_relaxed(0xF, mc->base +
> > +					      ((mc->pdata->status_reg + flow) << 2));
> >  				mc->chanlist[flow].status = 1;
> >  				complete(&mc->chanlist[flow].complete);
> >  				return IRQ_HANDLED;
> > @@ -245,15 +247,34 @@ static void meson_unregister_algs(struct meson_dev *mc)
> >  	}
> >  }
> >  
> > +static const struct meson_pdata meson_gxl_pdata = {
> > +	.descs_reg = 0x0,
> > +	.status_reg = 0x4,
> > +};
> > +
> > +static const struct of_device_id meson_crypto_of_match_table[] = {
> > +	{
> > +		.compatible = "amlogic,gxl-crypto",
> > +		.data = &meson_gxl_pdata,
> > +	},
> > +	{},
> > +};
> > +
> >  static int meson_crypto_probe(struct platform_device *pdev)
> >  {
> > +	const struct of_device_id *match;
> >  	struct meson_dev *mc;
> >  	int err;
> >  
> > +	match = of_match_device(meson_crypto_of_match_table, &pdev->dev);
> > +	if (!match)
> > +		return -EINVAL;
> > +
> >  	mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
> >  	if (!mc)
> >  		return -ENOMEM;
> >  
> > +	mc->pdata = match->data;
> >  	mc->dev = &pdev->dev;
> >  	platform_set_drvdata(pdev, mc);
> >  
> > @@ -312,12 +333,6 @@ static void meson_crypto_remove(struct platform_device *pdev)
> >  	clk_disable_unprepare(mc->busclk);
> >  }
> >  
> > -static const struct of_device_id meson_crypto_of_match_table[] = {
> > -	{ .compatible = "amlogic,gxl-crypto", },
> > -	{}
> > -};
> > -MODULE_DEVICE_TABLE(of, meson_crypto_of_match_table);
> 
> Hello
> 
> This patch breaks bisection, since it removes MODULE_DEVICE_TABLE.
> After applying patchs 1,2,3 the driver does not load anymore on lepotato board.

Please, give more information. 

I applied the first 3 patches and the driver probes correctly.

> 
> Regards

-- 
Thank you,
Alexey