[PATCH v4 1/3] dt-bindings: clock: fix C3 PLL input parameter
Jerome Brunet
jbrunet at baylibre.com
Fri Aug 30 01:10:10 PDT 2024
On Fri 30 Aug 2024 at 10:00, Neil Armstrong <neil.armstrong at linaro.org> wrote:
> Hi Jerome,
>
> On 30/08/2024 07:26, Xianwei Zhao via B4 Relay wrote:
>> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> Add C3 PLL controller input clock parameters "fix".
>> The clock named "fix" was initially implemented in PLL clock controller
>> driver. However, some registers required secure zone access, so we moved
>> it to the secure zone (BL31) and accessed it through SCMI. Since the PLL
>> clock driver needs to use this clock, the "fix" clock is used as an input
>> source. We updated the driver but forgot to modify the binding accordingly,
>> so we are adding it here.
>> It is an ABI break but on a new and immature platform. Noboby could
>> really
>> use that platform at this stage, so nothing is going to break on anyone
>> really.
>> Fixes: 0e6be855a96d ("dt-bindings: clock: add Amlogic C3 PLL clock
>> controller")
>> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
>> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
>> ---
>> Documentation/devicetree/bindings/clock/amlogic,c3-pll-clkc.yaml | 7 +++++--
>
> So you mind if I take this one via my arm64-dt tree ?
There is no conflicting change in my tree so it's fine, yes.
>
> Neil
>
> <snip>
--
Jerome
More information about the linux-amlogic
mailing list