[PATCH v3 0/9] reset: amlogic: move audio reset drivers out of CCF

Jerome Brunet jbrunet at baylibre.com
Thu Aug 8 03:27:30 PDT 2024


This patchset follows the discussion about having reset driver in the
clock tree [1]. Ideally those should reside in the reset part of tree.

Also the code of the amlogic reset driver is very similar between the 2
trees and could use the same driver code.

This patcheset alignes the reset drivers present in the reset and clock
then adds support for the reset driver of audio clock controller found in
the g12 and sm1 SoC family to the reset tree, using the auxiliary bus.

The infrastructure put in place is meant to be generic enough so we may
eventually also move the reset drivers in the meson8b and aoclk clock
controllers.

This was tested on sm1 vim3l and gxl aml-s905x-cc.

Changes since v2 [4]:
 * Fix undefined read access of the reset register
 * Fix Kconfig symbol description

Changes since v1 [3]:
 * Fixes formatting errors reported by Stephen.
 * Changed parameters type to unsigned
 * Fix usage of ops passed as parameters, previously ignored.
 * Return 0 instead of an error if reset support is absent
   to properly decouple from the clock and have a weak
   dependency
 * Split the platform and auxiliary modules in 2 distinct modules
   to fix the COMPILE_TEST error reported by ktest robot.

Change since RFC [2]:
 * Move the aux registration helper out of clock too.

[1] https://lore.kernel.org/linux-clk/e3a85852b911fdf16dd9ae158f42b3ef.sboyd@kernel.org
[2] https://lore.kernel.org/linux-clk/20240516150842.705844-1-jbrunet@baylibre.com
[3] https://lore.kernel.org/linux-clk/20240710162526.2341399-1-jbrunet@baylibre.com
[4] https://lore.kernel.org/linux-clk/20240718095755.3511992-1-jbrunet@baylibre.com

Jerome Brunet (9):
  reset: amlogic: convert driver to regmap
  reset: amlogic: use generic data matching function
  reset: amlogic: make parameters unsigned
  reset: amlogic: add driver parameters
  reset: amlogic: use reset number instead of register count
  reset: amlogic: add reset status support
  reset: amlogic: move drivers to a dedicated directory
  reset: amlogic: split the device core and platform probe
  reset: amlogic: add auxiliary reset driver support

 drivers/reset/Kconfig                         |  15 +-
 drivers/reset/Makefile                        |   3 +-
 drivers/reset/amlogic/Kconfig                 |  27 ++++
 drivers/reset/amlogic/Makefile                |   4 +
 .../{ => amlogic}/reset-meson-audio-arb.c     |   0
 drivers/reset/amlogic/reset-meson-aux.c       | 136 ++++++++++++++++
 drivers/reset/amlogic/reset-meson-core.c      | 139 ++++++++++++++++
 drivers/reset/amlogic/reset-meson-pltf.c      |  95 +++++++++++
 drivers/reset/amlogic/reset-meson.h           |  28 ++++
 drivers/reset/reset-meson.c                   | 153 ------------------
 include/soc/amlogic/meson-auxiliary-reset.h   |  23 +++
 11 files changed, 454 insertions(+), 169 deletions(-)
 create mode 100644 drivers/reset/amlogic/Kconfig
 create mode 100644 drivers/reset/amlogic/Makefile
 rename drivers/reset/{ => amlogic}/reset-meson-audio-arb.c (100%)
 create mode 100644 drivers/reset/amlogic/reset-meson-aux.c
 create mode 100644 drivers/reset/amlogic/reset-meson-core.c
 create mode 100644 drivers/reset/amlogic/reset-meson-pltf.c
 create mode 100644 drivers/reset/amlogic/reset-meson.h
 delete mode 100644 drivers/reset/reset-meson.c
 create mode 100644 include/soc/amlogic/meson-auxiliary-reset.h

-- 
2.43.0




More information about the linux-amlogic mailing list