[PATCH 3/3] arm64: dts: amlogic: add C3 AW419 board

[Krzysztof Kozlowski]

On 06/08/2024 12:27, Xianwei Zhao via B4 Relay wrote:
> From: Xianwei Zhao <xianwei.zhao at amlogic.com>
> 
> Add Amlogic C3 C308L AW419 board.
> 
> Signed-off-by: Xianwei Zhao <xianwei.zhao at amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile               |   1 +
>  .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts    | 278 +++++++++++++++++++++
>  2 files changed, 279 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 29417f04f886..2fbda8419c65 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -2,6 +2,7 @@
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb
> +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb
>  dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
> new file mode 100644
> index 000000000000..d28fd2a1acf0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
> @@ -0,0 +1,278 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2024 Amlogic, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "amlogic-c3.dtsi"
> +
> +/ {
> +	model = "Amlogic C308l aw419 Development Board";
> +	compatible = "amlogic,aw419", "amlogic,c3";

Where are the bindings? Why do you add bindings without boards? Or
boards without bindings?

Best regards,
Krzysztof