[PATCH v2 3/4] PCI: imx6: Convert to agnostic GPIO API
Manivannan Sadhasivam
manivannan.sadhasivam at linaro.org
Fri Apr 26 23:43:29 PDT 2024
On Tue, Apr 23, 2024 at 08:19:06PM +0300, Andy Shevchenko wrote:
> The of_gpio.h is going to be removed. In preparation of that convert
> the driver to the agnostic API.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
- Mani
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 37 ++++++++++-----------------
> 1 file changed, 14 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 917c69edee1d..d620f1e1a43c 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -11,14 +11,13 @@
> #include <linux/bitfield.h>
> #include <linux/clk.h>
> #include <linux/delay.h>
> -#include <linux/gpio.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
> #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
> #include <linux/module.h>
> #include <linux/of.h>
> -#include <linux/of_gpio.h>
> #include <linux/of_address.h>
> #include <linux/pci.h>
> #include <linux/platform_device.h>
> @@ -107,7 +106,7 @@ struct imx6_pcie_drvdata {
>
> struct imx6_pcie {
> struct dw_pcie *pci;
> - int reset_gpio;
> + struct gpio_desc *reset_gpiod;
> bool gpio_active_high;
> bool link_is_up;
> struct clk_bulk_data clks[IMX6_PCIE_MAX_CLKS];
> @@ -721,9 +720,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
> }
>
> /* Some boards don't have PCIe reset GPIO. */
> - if (gpio_is_valid(imx6_pcie->reset_gpio))
> - gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> - imx6_pcie->gpio_active_high);
> + gpiod_set_raw_value_cansleep(imx6_pcie->reset_gpiod,
> + imx6_pcie->gpio_active_high);
> }
>
> static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> @@ -771,10 +769,10 @@ static int imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
> }
>
> /* Some boards don't have PCIe reset GPIO. */
> - if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> + if (imx6_pcie->reset_gpiod) {
> msleep(100);
> - gpio_set_value_cansleep(imx6_pcie->reset_gpio,
> - !imx6_pcie->gpio_active_high);
> + gpiod_set_raw_value_cansleep(imx6_pcie->reset_gpiod,
> + !imx6_pcie->gpio_active_high);
> /* Wait for 100ms after PERST# deassertion (PCIe r5.0, 6.6.1) */
> msleep(100);
> }
> @@ -1285,22 +1283,15 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> return PTR_ERR(pci->dbi_base);
>
> /* Fetch GPIOs */
> - imx6_pcie->reset_gpio = of_get_named_gpio(node, "reset-gpio", 0);
> imx6_pcie->gpio_active_high = of_property_read_bool(node,
> "reset-gpio-active-high");
> - if (gpio_is_valid(imx6_pcie->reset_gpio)) {
> - ret = devm_gpio_request_one(dev, imx6_pcie->reset_gpio,
> - imx6_pcie->gpio_active_high ?
> - GPIOF_OUT_INIT_HIGH :
> - GPIOF_OUT_INIT_LOW,
> - "PCIe reset");
> - if (ret) {
> - dev_err(dev, "unable to get reset gpio\n");
> - return ret;
> - }
> - } else if (imx6_pcie->reset_gpio == -EPROBE_DEFER) {
> - return imx6_pcie->reset_gpio;
> - }
> + imx6_pcie->reset_gpiod =
> + devm_gpiod_get_optional(dev, "reset",
> + imx6_pcie->gpio_active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
> + if (IS_ERR(imx6_pcie->reset_gpiod))
> + return dev_err_probe(dev, PTR_ERR(imx6_pcie->reset_gpiod),
> + "unable to get reset gpio\n");
> + gpiod_set_consumer_name(imx6_pcie->reset_gpiod, "PCIe reset");
>
> if (imx6_pcie->drvdata->clks_cnt >= IMX6_PCIE_MAX_CLKS)
> return dev_err_probe(dev, -ENOMEM, "clks_cnt is too big\n");
> --
> 2.43.0.rc1.1336.g36b5255a03ac
>
>
--
மணிவண்ணன் சதாசிவம்
More information about the linux-amlogic
mailing list