[PATCH 2/2] pwm: meson: add check for error from clk_round_rate()

[George Stark]

clk_round_rate() can return not only zero if requested frequency can not
be provided but also negative error code so add check for it too.

Fixes: 329db102a26d ("pwm: meson: make full use of common clock framework")
Signed-off-by: George Stark <gnstark at salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
---
 drivers/pwm/pwm-meson.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index ebe76298f6e2..52604635b31e 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -168,9 +168,10 @@ static int meson_pwm_calc(struct pwm_chip *chip, struct pwm_device *pwm,
 		freq = ULONG_MAX;
 
 	fin_freq = clk_round_rate(channel->clk, freq);
-	if (fin_freq == 0) {
-		dev_err(pwmchip_parent(chip), "invalid source clock frequency\n");
-		return -EINVAL;
+	if (fin_freq <= 0) {
+		dev_err(pwmchip_parent(chip),
+			"invalid source clock frequency %llu\n", freq);
+		return fin_freq ? fin_freq : -EINVAL;
 	}
 
 	dev_dbg(pwmchip_parent(chip), "fin_freq: %lu Hz\n", fin_freq);
-- 
2.25.1