[RFC PATCH v3 4/6] dt-bindings: clock: meson: document A1 SoC audio clock controller driver
Jan Dakinevich
jan.dakinevich at salutedevices.com
Mon Apr 22 08:43:54 PDT 2024
On 4/22/24 17:31, Jan Dakinevich wrote:
>
>
> On 4/22/24 10:57, Jerome Brunet wrote:
>>
>> On Mon 22 Apr 2024 at 09:16, Jerome Brunet <jbrunet at baylibre.com> wrote:
>>
>>> On Sun 21 Apr 2024 at 20:14, Krzysztof Kozlowski <krzk at kernel.org> wrote:
>>>
>>>> On 20/04/2024 18:15, Jan Dakinevich wrote:
>>>>>
>>>>>
>>>>> On 4/20/24 00:09, Rob Herring wrote:
>>>>>> On Fri, Apr 19, 2024 at 03:58:10PM +0300, Jan Dakinevich wrote:
>>>>>>> Add device tree bindings for A1 SoC audio clock and reset controllers.
>>>>>>>
>>>>>>> Signed-off-by: Jan Dakinevich <jan.dakinevich at salutedevices.com>
>>>>>>> ---
>>>>>>>
>>>>>>> This controller has 6 mandatory and up to 20 optional clocks. To describe
>>>>>>> this, I use 'additionalItems'. It produces correct processed-schema.json:
>>>>>>>
>>>>>>> "clock-names": {
>>>>>>> "maxItems": 26,
>>>>>>> "items": [
>>>>>>> {
>>>>>>> "const": "pclk"
>>>>>>> },
>>>>>>> {
>>>>>>> "const": "dds_in"
>>>>>>> },
>>>>>>> {
>>>>>>> "const": "fclk_div2"
>>>>>>> },
>>>>>>> {
>>>>>>> "const": "fclk_div3"
>>>>>>> },
>>>>>>> {
>>>>>>> "const": "hifi_pll"
>>>>>>> },
>>>>>>> {
>>>>>>> "const": "xtal"
>>>>>>> }
>>>>>>> ],
>>>>>>> "additionalItems": {
>>>>>>> "oneOf": [
>>>>>>> {
>>>>>>> "pattern": "^slv_sclk[0-9]$"
>>>>>>> },
>>>>>>> {
>>>>>>> "pattern": "^slv_lrclk[0-9]$"
>>>>>>> }
>>>>>>> ]
>>>>>>> },
>>>>>>> "type": "array",
>>>>>>> "minItems": 6
>>>>>>> },
>>>>>>>
>>>>>>> and it behaves as expected. However, the checking is followed by
>>>>>>> complaints like this:
>>>>>>>
>>>>>>> Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml: properties:clock-names:additionalItems: {'oneOf': [{'pattern': '^slv_sclk[0-9]$'}, {'pattern': '^slv_lrclk[0-9]$'}]} is not of type 'boolean'
>>>>>>>
>>>>>>> And indeed, 'additionalItems' has boolean type in meta-schema. So, how to
>>>>>>> do it right?
>>>>>>
>>>>>> The meta-schemas are written both to prevent nonsense that json-schema
>>>>>> allows by default (e.g additionalitems (wrong case)) and constraints to
>>>>>> follow the patterns we expect. I'm happy to loosen the latter case if
>>>>>> there's really a need.
>>>>>>
>>>>>> Generally, most bindings shouldn't be using 'additionalItems' at all as
>>>>>> all entries should be defined, but there's a few exceptions. Here, the
>>>>>> only reasoning I see is 26 entries is a lot to write out, but that
>>>>>> wouldn't really justify it.
>>>>>
>>>>> Writing a lot of entries don't scary me too much, but the reason is that
>>>>> the existence of optional clock sources depends on schematics. Also, we
>>>>
>>>> Aren't you documenting SoC component, not a board? So how exactly it
>>>> depends on schematics? SoC is done or not done...
>>>>
>>>>> unable to declare dt-nodes for 'clocks' array in any generic way,
>>>>> because their declaration would depends on that what is actually
>>>>> connected to the SoC (dt-node could be "fixed-clock" with specific rate
>>>>> or something else).
>>>>
>>>> So these are clock inputs to the SoC?
>>>>
>>>
>>> Yes, possibly.
>>> Like an external crystal or a set clocks provided by an external codec
>>> where the codec is the clock master of the link.
>>>
>>> This is same case as the AXG that was discussed here:
>>> https://lore.kernel.org/linux-devicetree/20230808194811.113087-1-alexander.stein@mailbox.org/
>>>
>>> IMO, like the AXG, only the pclk is a required clock.
>>> All the others - master and slave clocks - are optional.
>>> The controller is designed to operate with grounded inputs
>>
>> Looking again at the implementation of the controller, there is a clear
>> indication in patch 3 that the controller interface is the same as the
>> AXG and that the above statement is true.
>>> The AXG had 8 master clocks wired in. The A1 just has 5 - and 3 grounded
>> master clocks. This is why you to had to provide a mux input table to
>> skip the grounded inputs. You would not have to do so if the controller was
>> properly declared with the 8 master clock input, as it actually is.
>>
>
> For simplicity, I could make something like this in device tree:
>
> clocks = <&clk0,
> &clk1,
> &clk2,
> &clk3,
> &clk4,
> 0,
> 0,
> 0>
> clock-names = <"mst_in0",
> "mst_in1",
> "mst_in2"
> "mst_in2"
> "mst_in3"
> "mst_in4"
> "mst_in5"
> "mst_in6"
> "mst_in7">
>
> But I don't see in the doc that the last 3 clocks are grounded to
> anywhere. It will be just community's assumption about internals of the
> controller.
>
> Anyway, I still don't understand what to do with external slv_* clocks.
> I can do the same as in example above: list slv_(s|lr)clk[0-9] in
> "clock-names" and fill the rest if "clocks" by "0" phandles.
>
Sorry, I missed that you suggested similar thing:
>>> I think the simpliest way to deal with this to just list all the clocks
>>> with 'minItems = 1'. It is going be hard to read with a lot of '<0>,' in
>>> the DTS when do need those slave clocks but at least the binding doc
>>> will be simple.
But, may be it could be better to claim that all clocks are mandatory
and list all of them (including slv_*)? So, 'minItems = 1' can be
omitted. What do you think?
clocks = <&pclk,
&clk0,
&clk1,
&clk2,
&clk3,
&clk4,
0,
0,
0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0>;
clock-names = <"pclk",
"mst_in0",
"mst_in1",
"mst_in2"
"mst_in2"
"mst_in3"
"mst_in4"
"mst_in5"
"mst_in6"
"mst_in7",
"slv_sclk0",
"slv_sclk1",
"slv_sclk2",
"slv_sclk3",
"slv_sclk4",
"slv_sclk5",
"slv_sclk6",
"slv_sclk7",
"slv_sclk8",
"slv_sclk9",
"slv_lrclk0",
"slv_lrclk1",
"slv_lrclk2",
"slv_lrclk3",
"slv_lrclk4",
"slv_lrclk5",
"slv_lrclk6",
"slv_lrclk7",
"slv_lrclk8",
"slv_lrclk9">;
>> It also shows that it is a bad idea to name input after what is coming
>> in (like you do with "dds_in" or "fclk_div2") instead of what they
>> actually are like in the AXG (mst0, mst1, etc ...)
>>
>
> I agree, these are not the best names.
>
>>>
>>>>>
>>>>> By the way, I don't know any example (neither for A1 SoC nor for other
>>>>> Amlogic's SoCs) where these optional clocks are used, but they are
>>>>> allowed by hw.
>>>
>>> Those scenario exists and have been tested. There is just no dts using
>>> that upstream because they are all mostly copy of the AML ref design.
>>>
>>>>>
>>>>> This is my understanding of this controller. I hope, Jerome Brunet will
>>>>> clarify how it actually works.
>>>>
>>>
>>> I think the simpliest way to deal with this to just list all the clocks
>>> with 'minItems = 1'. It is going be hard to read with a lot of '<0>,' in
>>> the DTS when do need those slave clocks but at least the binding doc
>>> will be simple.
>>>
>>>> Best regards,
>>>> Krzysztof
>>>
>>> If you are going ahead with this, please name the file
>>> amlogic,axg-audio-clkc.yaml because this is really the first controller
>>> of the type and is meant to be documented in the same file.
>>>
>>> You are free to handle the conversion of the AXG at the same time if
>>> you'd like. It would be much appreciated if you do.
>>
>>
>
--
Best regards
Jan Dakinevich
More information about the linux-amlogic
mailing list