[PATCH v2 1/2] dt-bindings: mtd: amlogic,meson-nand: support fields for boot ROM code
Arseniy Krasnov
avkrasnov at salutedevices.com
Tue Apr 9 07:10:25 PDT 2024
On 09.04.2024 16:47, Rob Herring wrote:
> On Mon, Apr 08, 2024 at 11:59:30AM +0300, Arseniy Krasnov wrote:
>> Boot ROM code on Meson requires that some pages on NAND must be written
>> in special mode: "short" ECC mode where each block is 384 bytes and
>> scrambling mode is on. Such pages located with the specified interval
>> within specified offset. Both interval and offset are located in the
>> device tree and used by driver if 'nand-is-boot-medium' is set for
>> NAND chip.
>>
>> Signed-off-by: Arseniy Krasnov <avkrasnov at salutedevices.com>
>> ---
>> .../bindings/mtd/amlogic,meson-nand.yaml | 14 ++++++++++++++
>> 1 file changed, 14 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> index 57b6957c8415..80ba5003ca70 100644
>> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
>> @@ -64,11 +64,25 @@ patternProperties:
>> items:
>> maximum: 0
>>
>> + amlogic,boot-page-last:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + The NFC driver needs this information to select ECC
>> + algorithms supported by the boot ROM.
>> +
>> + amlogic,boot-page-step:
>> + $ref: /schemas/types.yaml#/definitions/uint32
>> + description:
>> + The NFC driver needs this information to select ECC
>> + algorithms supported by the boot ROM (in pages).
>> +
>> unevaluatedProperties: false
>>
>> dependencies:
>> nand-ecc-strength: [nand-ecc-step-size]
>> nand-ecc-step-size: [nand-ecc-strength]
>> + amlogic,boot-page-last: [nand-is-boot-medium, amlogic,boot-page-step]
>> + amlogic,boot-page-step: [nand-is-boot-medium, amlogic,boot-page-last]
>
> You need quotes if using the inline syntax.
IIUC it must look like this:
amlogic,boot-page-last: [nand-is-boot-medium, "amlogic,boot-page-step"]
etc.
>
> Rob
More information about the linux-amlogic
mailing list