[PATCH v12 3/7] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
Neil Armstrong
neil.armstrong at linaro.org
Wed Apr 3 00:46:34 PDT 2024
In order to setup the DSI clock, let's make the unused VCLK2 clock path
configuration via CCF.
The nocache option is removed from following clocks:
- vclk2_sel
- vclk2_input
- vclk2_div
- vclk2
- vclk_div1
- vclk2_div2_en
- vclk2_div4_en
- vclk2_div6_en
- vclk2_div12_en
- vclk2_div2
- vclk2_div4
- vclk2_div6
- vclk2_div12
- cts_encl_sel
vclk2 and vclk2_div uses the newly introduced vclk regmap driver
to handle the enable and reset bits.
In order to set a rate on cts_encl via the vclk2 clock path,
the NO_REPARENT flag is set on cts_encl_sel & vclk2_sel in order
to keep CCF from selection a parent.
The parents of cts_encl_sel & vclk2_sel are expected to be defined
in DT or manually set by the display driver at some point.
The following clock scheme is to be used for DSI:
xtal
\_ gp0_pll_dco
\_ gp0_pll
|- vclk2_sel
| \_ vclk2_input
| \_ vclk2_div
| \_ vclk2
| \_ vclk2_div1
| \_ cts_encl_sel
| \_ cts_encl -> to VPU LCD Encoder
|- mipi_dsi_pxclk_sel
\_ mipi_dsi_pxclk_div
\_ mipi_dsi_pxclk -> to DSI controller
The mipi_dsi_pxclk_div is set as bypass with a single /1 entry in div_table
in order to use the same GP0 for mipi_dsi_pxclk and vclk2_input.
The SET_RATE_PARENT is only set on the mipi_dsi_pxclk_sel clock so the
DSI bitclock is the reference base clock to calculate the vclk2_div value
when pixel clock is set on the cts_encl endpoint.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
drivers/clk/meson/Kconfig | 1 +
drivers/clk/meson/g12a.c | 76 ++++++++++++++++++++++++++++++++++-------------
2 files changed, 57 insertions(+), 20 deletions(-)
diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
index 8a9823789fa3..59a40a49f8e1 100644
--- a/drivers/clk/meson/Kconfig
+++ b/drivers/clk/meson/Kconfig
@@ -144,6 +144,7 @@ config COMMON_CLK_G12A
select COMMON_CLK_MESON_EE_CLKC
select COMMON_CLK_MESON_CPU_DYNDIV
select COMMON_CLK_MESON_VID_PLL_DIV
+ select COMMON_CLK_MESON_VCLK
select MFD_SYSCON
help
Support for the clock controller on Amlogic S905D2, S905X2 and S905Y2
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 90f4c6103014..df7e17c850d8 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -22,6 +22,7 @@
#include "clk-regmap.h"
#include "clk-cpu-dyndiv.h"
#include "vid-pll-div.h"
+#include "vclk.h"
#include "meson-eeclk.h"
#include "g12a.h"
@@ -3165,7 +3166,7 @@ static struct clk_regmap g12a_vclk2_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_vclk_parent_hws,
.num_parents = ARRAY_SIZE(g12a_vclk_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_NO_REPARENT,
},
};
@@ -3193,7 +3194,6 @@ static struct clk_regmap g12a_vclk2_input = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_sel.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
},
};
@@ -3215,19 +3215,32 @@ static struct clk_regmap g12a_vclk_div = {
};
static struct clk_regmap g12a_vclk2_div = {
- .data = &(struct clk_regmap_div_data){
- .offset = HHI_VIID_CLK_DIV,
- .shift = 0,
- .width = 8,
+ .data = &(struct meson_vclk_div_data){
+ .div = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 0,
+ .width = 8,
+ },
+ .enable = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 16,
+ .width = 1,
+ },
+ .reset = {
+ .reg_off = HHI_VIID_CLK_DIV,
+ .shift = 17,
+ .width = 1,
+ },
+ .flags = CLK_DIVIDER_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
.name = "vclk2_div",
- .ops = &clk_regmap_divider_ops,
+ .ops = &meson_vclk_div_ops,
.parent_hws = (const struct clk_hw *[]) {
&g12a_vclk2_input.hw
},
.num_parents = 1,
- .flags = CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_GATE,
},
};
@@ -3246,16 +3259,24 @@ static struct clk_regmap g12a_vclk = {
};
static struct clk_regmap g12a_vclk2 = {
- .data = &(struct clk_regmap_gate_data){
- .offset = HHI_VIID_CLK_CNTL,
- .bit_idx = 19,
+ .data = &(struct meson_vclk_gate_data){
+ .enable = {
+ .reg_off = HHI_VIID_CLK_CNTL,
+ .shift = 19,
+ .width = 1,
+ },
+ .reset = {
+ .reg_off = HHI_VIID_CLK_CNTL,
+ .shift = 15,
+ .width = 1,
+ },
},
.hw.init = &(struct clk_init_data) {
.name = "vclk2",
- .ops = &clk_regmap_gate_ops,
+ .ops = &meson_vclk_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2_div.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3339,7 +3360,7 @@ static struct clk_regmap g12a_vclk2_div1 = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3353,7 +3374,7 @@ static struct clk_regmap g12a_vclk2_div2_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3367,7 +3388,7 @@ static struct clk_regmap g12a_vclk2_div4_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3381,7 +3402,7 @@ static struct clk_regmap g12a_vclk2_div6_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3395,7 +3416,7 @@ static struct clk_regmap g12a_vclk2_div12_en = {
.ops = &clk_regmap_gate_ops,
.parent_hws = (const struct clk_hw *[]) { &g12a_vclk2.hw },
.num_parents = 1,
- .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3461,6 +3482,7 @@ static struct clk_fixed_factor g12a_vclk2_div2 = {
&g12a_vclk2_div2_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3474,6 +3496,7 @@ static struct clk_fixed_factor g12a_vclk2_div4 = {
&g12a_vclk2_div4_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3487,6 +3510,7 @@ static struct clk_fixed_factor g12a_vclk2_div6 = {
&g12a_vclk2_div6_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3500,6 +3524,7 @@ static struct clk_fixed_factor g12a_vclk2_div12 = {
&g12a_vclk2_div12_en.hw
},
.num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
},
};
@@ -3561,7 +3586,7 @@ static struct clk_regmap g12a_cts_encl_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_cts_parent_hws,
.num_parents = ARRAY_SIZE(g12a_cts_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT | CLK_GET_RATE_NOCACHE,
+ .flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
},
};
@@ -3717,15 +3742,26 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = {
.ops = &clk_regmap_mux_ops,
.parent_hws = g12a_mipi_dsi_pxclk_parent_hws,
.num_parents = ARRAY_SIZE(g12a_mipi_dsi_pxclk_parent_hws),
- .flags = CLK_SET_RATE_NO_REPARENT,
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
},
};
+/*
+ * FIXME: Force as bypass by forcing a single /1 table entry, and doensn't on boot value
+ * when setting a clock whith this node in the clock path, but doesn't garantee the divider
+ * is at /1 at boot until a rate is set.
+ */
+static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
+ { .val = 0, .div = 1 },
+ { /* sentinel */ },
+};
+
static struct clk_regmap g12a_mipi_dsi_pxclk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MIPIDSI_PHY_CLK_CNTL,
.shift = 0,
.width = 7,
+ .table = g12a_mipi_dsi_pxclk_div_table,
},
.hw.init = &(struct clk_init_data){
.name = "mipi_dsi_pxclk_div",
--
2.34.1
More information about the linux-amlogic
mailing list