[PATCH v1 6/6] clk: meson: a1: add Amlogic A1 CPU clock controller driver
Jerome Brunet
jbrunet at baylibre.com
Tue Apr 2 09:17:05 PDT 2024
On Tue 02 Apr 2024 at 19:11, Dmitry Rokosov <ddrokosov at salutedevices.com> wrote:
> On Tue, Apr 02, 2024 at 04:11:12PM +0200, Jerome Brunet wrote:
>>
>> On Tue 02 Apr 2024 at 14:05, Dmitry Rokosov <ddrokosov at salutedevices.com> wrote:
>>
>> > Hello Jerome,
>> >
>> > On Tue, Apr 02, 2024 at 11:35:49AM +0200, Jerome Brunet wrote:
>> >>
>> >> On Fri 29 Mar 2024 at 23:58, Dmitry Rokosov <ddrokosov at salutedevices.com> wrote:
>> >>
>> >> > The CPU clock controller plays a general role in the Amlogic A1 SoC
>> >> > family by generating CPU clocks. As an APB slave module, it offers the
>> >> > capability to inherit the CPU clock from two sources: the internal fixed
>> >> > clock known as 'cpu fixed clock' and the external input provided by the
>> >> > A1 PLL clock controller, referred to as 'syspll'.
>> >> >
>> >> > It is important for the driver to handle cpu_clk rate switching
>> >> > effectively by transitioning to the CPU fixed clock to avoid any
>> >> > potential execution freezes.
>> >> >
>> >> > Signed-off-by: Dmitry Rokosov <ddrokosov at salutedevices.com>
>> >> > ---
>> >> > drivers/clk/meson/Kconfig | 10 ++
>> >> > drivers/clk/meson/Makefile | 1 +
>> >> > drivers/clk/meson/a1-cpu.c | 324 +++++++++++++++++++++++++++++++++++++
>> >> > drivers/clk/meson/a1-cpu.h | 16 ++
>> >> > 4 files changed, 351 insertions(+)
>> >> > create mode 100644 drivers/clk/meson/a1-cpu.c
>> >> > create mode 100644 drivers/clk/meson/a1-cpu.h
>> >> >
>> >> > diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
>> >> > index 80c4a18c83d2..148d4495eee3 100644
>> >> > --- a/drivers/clk/meson/Kconfig
>> >> > +++ b/drivers/clk/meson/Kconfig
>> >> > @@ -111,6 +111,16 @@ config COMMON_CLK_AXG_AUDIO
>> >> > Support for the audio clock controller on AmLogic A113D devices,
>> >> > aka axg, Say Y if you want audio subsystem to work.
>> >> >
>> >> > +config COMMON_CLK_A1_CPU
>> >> > + tristate "Amlogic A1 SoC CPU controller support"
>> >> > + depends on ARM64
>> >> > + select COMMON_CLK_MESON_REGMAP
>> >> > + select COMMON_CLK_MESON_CLKC_UTILS
>> >> > + help
>> >> > + Support for the CPU clock controller on Amlogic A113L based
>> >> > + device, A1 SoC Family. Say Y if you want A1 CPU clock controller
>> >> > + to work.
>> >> > +
>> >> > config COMMON_CLK_A1_PLL
>> >> > tristate "Amlogic A1 SoC PLL controller support"
>> >> > depends on ARM64
>> >> > diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
>> >> > index 4968fc7ad555..2a06eb0303d6 100644
>> >> > --- a/drivers/clk/meson/Makefile
>> >> > +++ b/drivers/clk/meson/Makefile
>> >> > @@ -18,6 +18,7 @@ obj-$(CONFIG_COMMON_CLK_MESON_AUDIO_RSTC) += meson-audio-rstc.o
>> >> >
>> >> > obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
>> >> > obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>> >> > +obj-$(CONFIG_COMMON_CLK_A1_CPU) += a1-cpu.o
>> >> > obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>> >> > obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
>> >> > obj-$(CONFIG_COMMON_CLK_A1_AUDIO) += a1-audio.o
>> >> > diff --git a/drivers/clk/meson/a1-cpu.c b/drivers/clk/meson/a1-cpu.c
>> >> > new file mode 100644
>> >> > index 000000000000..5f5d8ae112e5
>> >> > --- /dev/null
>> >> > +++ b/drivers/clk/meson/a1-cpu.c
>> >> > @@ -0,0 +1,324 @@
>> >> > +// SPDX-License-Identifier: GPL-2.0+
>> >> > +/*
>> >> > + * Amlogic A1 SoC family CPU Clock Controller driver.
>> >> > + *
>> >> > + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> >> > + * Author: Dmitry Rokosov <ddrokosov at salutedevices.com>
>> >> > + */
>> >> > +
>> >> > +#include <linux/clk.h>
>> >> > +#include <linux/clk-provider.h>
>> >> > +#include <linux/mod_devicetable.h>
>> >> > +#include <linux/platform_device.h>
>> >> > +#include "a1-cpu.h"
>> >> > +#include "clk-regmap.h"
>> >> > +#include "meson-clkc-utils.h"
>> >> > +
>> >> > +#include <dt-bindings/clock/amlogic,a1-cpu-clkc.h>
>> >> > +
>> >> > +static u32 cpu_fsource_sel_table[] = { 0, 1, 2 };
>> >> > +static const struct clk_parent_data cpu_fsource_sel_parents[] = {
>> >> > + { .fw_name = "xtal" },
>> >> > + { .fw_name = "fclk_div2" },
>> >> > + { .fw_name = "fclk_div3" },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsource_sel0 = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x3,
>> >> > + .shift = 0,
>> >> > + .table = cpu_fsource_sel_table,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsource_sel0",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_data = cpu_fsource_sel_parents,
>> >> > + .num_parents = ARRAY_SIZE(cpu_fsource_sel_parents),
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsource_div0 = {
>> >> > + .data = &(struct clk_regmap_div_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .shift = 4,
>> >> > + .width = 6,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsource_div0",
>> >> > + .ops = &clk_regmap_divider_ops,
>> >> > + .parent_hws = (const struct clk_hw *[]) {
>> >> > + &cpu_fsource_sel0.hw
>> >> > + },
>> >> > + .num_parents = 1,
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsel0 = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x1,
>> >> > + .shift = 2,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsel0",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_hws = (const struct clk_hw *[]) {
>> >> > + &cpu_fsource_sel0.hw,
>> >> > + &cpu_fsource_div0.hw,
>> >> > + },
>> >> > + .num_parents = 2,
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsource_sel1 = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x3,
>> >> > + .shift = 16,
>> >> > + .table = cpu_fsource_sel_table,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsource_sel1",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_data = cpu_fsource_sel_parents,
>> >> > + .num_parents = ARRAY_SIZE(cpu_fsource_sel_parents),
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsource_div1 = {
>> >> > + .data = &(struct clk_regmap_div_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .shift = 20,
>> >> > + .width = 6,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsource_div1",
>> >> > + .ops = &clk_regmap_divider_ops,
>> >> > + .parent_hws = (const struct clk_hw *[]) {
>> >> > + &cpu_fsource_sel1.hw
>> >> > + },
>> >> > + .num_parents = 1,
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fsel1 = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x1,
>> >> > + .shift = 18,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fsel1",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_hws = (const struct clk_hw *[]) {
>> >> > + &cpu_fsource_sel1.hw,
>> >> > + &cpu_fsource_div1.hw,
>> >> > + },
>> >> > + .num_parents = 2,
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_fclk = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x1,
>> >> > + .shift = 10,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_fclk",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_hws = (const struct clk_hw *[]) {
>> >> > + &cpu_fsel0.hw,
>> >> > + &cpu_fsel1.hw,
>> >> > + },
>> >> > + .num_parents = 2,
>> >> > + .flags = CLK_SET_RATE_PARENT,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap cpu_clk = {
>> >> > + .data = &(struct clk_regmap_mux_data) {
>> >> > + .offset = CPUCTRL_CLK_CTRL0,
>> >> > + .mask = 0x1,
>> >> > + .shift = 11,
>> >> > + },
>> >> > + .hw.init = &(struct clk_init_data) {
>> >> > + .name = "cpu_clk",
>> >> > + .ops = &clk_regmap_mux_ops,
>> >> > + .parent_data = (const struct clk_parent_data []) {
>> >> > + { .hw = &cpu_fclk.hw },
>> >> > + { .fw_name = "sys_pll", },
>> >> > + },
>> >> > + .num_parents = 2,
>> >> > + .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +/* Array of all clocks registered by this provider */
>> >> > +static struct clk_hw *a1_cpu_hw_clks[] = {
>> >> > + [CLKID_CPU_FSOURCE_SEL0] = &cpu_fsource_sel0.hw,
>> >> > + [CLKID_CPU_FSOURCE_DIV0] = &cpu_fsource_div0.hw,
>> >> > + [CLKID_CPU_FSEL0] = &cpu_fsel0.hw,
>> >> > + [CLKID_CPU_FSOURCE_SEL1] = &cpu_fsource_sel1.hw,
>> >> > + [CLKID_CPU_FSOURCE_DIV1] = &cpu_fsource_div1.hw,
>> >> > + [CLKID_CPU_FSEL1] = &cpu_fsel1.hw,
>> >> > + [CLKID_CPU_FCLK] = &cpu_fclk.hw,
>> >> > + [CLKID_CPU_CLK] = &cpu_clk.hw,
>> >> > +};
>> >> > +
>> >> > +static struct clk_regmap *const a1_cpu_regmaps[] = {
>> >> > + &cpu_fsource_sel0,
>> >> > + &cpu_fsource_div0,
>> >> > + &cpu_fsel0,
>> >> > + &cpu_fsource_sel1,
>> >> > + &cpu_fsource_div1,
>> >> > + &cpu_fsel1,
>> >> > + &cpu_fclk,
>> >> > + &cpu_clk,
>> >> > +};
>> >> > +
>> >> > +static struct regmap_config a1_cpu_regmap_cfg = {
>> >> > + .reg_bits = 32,
>> >> > + .val_bits = 32,
>> >> > + .reg_stride = 4,
>> >> > + .max_register = CPUCTRL_CLK_CTRL1,
>> >> > +};
>> >> > +
>> >> > +static struct meson_clk_hw_data a1_cpu_clks = {
>> >> > + .hws = a1_cpu_hw_clks,
>> >> > + .num = ARRAY_SIZE(a1_cpu_hw_clks),
>> >> > +};
>> >> > +
>> >> > +struct a1_cpu_clk_nb_data {
>> >> > + const struct clk_ops *mux_ops;
>> >>
>> >> That's fishy ...
>> >>
>> >> > + struct clk_hw *cpu_clk;
>> >> > + struct notifier_block nb;
>> >> > + u8 parent;
>> >> > +};
>> >> > +
>> >> > +#define MESON_A1_CPU_CLK_GET_PARENT(nbd) \
>> >> > + ((nbd)->mux_ops->get_parent((nbd)->cpu_clk))
>> >> > +#define MESON_A1_CPU_CLK_SET_PARENT(nbd, index) \
>> >> > + ((nbd)->mux_ops->set_parent((nbd)->cpu_clk, index))
>> >>
>> >> ... Directly going for the mux ops ??!?? No way !
>> >>
>> >> We have a framework to handle the clocks, the whole point is to use it,
>> >> not bypass it !
>> >>
>> >
>> > I suppose you understand my approach, which is quite similar to what is
>> > happening in the Mediatek driver:
>> >
>> > https://elixir.bootlin.com/linux/latest/source/drivers/clk/mediatek/clk-mux.c#L295
>> >
>> > Initially, I attempted to set the parent using the clk_set_parent() API.
>> > However, I encountered a problem with recursive calling of the
>> > notifier_block. This issue arises because the parent triggers
>> > notifications for its children, leading to repeated calls to the
>> > notifier_block.
>> >
>> > I find it puzzling why I cannot call an internal function or callback
>> > within the internal driver context. After all, the notifier block is
>> > just a part of the set_rate() flow. From a global Clock Control
>> > Framework perspective, the context should not change.
>>
>> I don't care what MTK is doing TBH. Forcefully calling ops on a clock,
>> hoping they are going to match with the clock type is wrong.
>>
>> There is a clk_hw API. Please it.
>>
>
> Yes, if sys_pll has a notifier_block instead of cpu_clk, there will be
> no problem with the clk_hw API.
>
> I will rework that point.
>
>> >
>> >> > +
>> >> > +static int meson_a1_cpu_clk_notifier_cb(struct notifier_block *nb,
>> >> > + unsigned long event, void *data)
>> >> > +{
>> >> > + struct a1_cpu_clk_nb_data *nbd;
>> >> > + int ret = 0;
>> >> > +
>> >> > + nbd = container_of(nb, struct a1_cpu_clk_nb_data, nb);
>> >> > +
>> >> > + switch (event) {
>> >> > + case PRE_RATE_CHANGE:
>> >> > + nbd->parent = MESON_A1_CPU_CLK_GET_PARENT(nbd);
>> >> > + /* Fallback to the CPU fixed clock */
>> >> > + ret = MESON_A1_CPU_CLK_SET_PARENT(nbd, 0);
>> >> > + /* Wait for clock propagation */
>> >> > + udelay(100);
>> >> > + break;
>> >> > +
>> >> > + case POST_RATE_CHANGE:
>> >> > + case ABORT_RATE_CHANGE:
>> >> > + /* Back to the original parent clock */
>> >> > + ret = MESON_A1_CPU_CLK_SET_PARENT(nbd, nbd->parent);
>> >> > + /* Wait for clock propagation */
>> >> > + udelay(100);
>> >> > + break;
>> >> > +
>> >> > + default:
>> >> > + pr_warn("Unknown event %lu for %s notifier block\n",
>> >> > + event, clk_hw_get_name(nbd->cpu_clk));
>> >> > + break;
>> >> > + }
>> >> > +
>> >> > + return notifier_from_errno(ret);
>> >> > +}
>> >> > +
>> >> > +static struct a1_cpu_clk_nb_data a1_cpu_clk_nb_data = {
>> >> > + .mux_ops = &clk_regmap_mux_ops,
>> >> > + .cpu_clk = &cpu_clk.hw,
>> >> > + .nb.notifier_call = meson_a1_cpu_clk_notifier_cb,
>> >> > +};
>> >> > +
>> >> > +static int meson_a1_dvfs_setup(struct platform_device *pdev)
>> >> > +{
>> >> > + struct device *dev = &pdev->dev;
>> >> > + struct clk *notifier_clk;
>> >> > + int ret;
>> >> > +
>> >> > + /* Setup clock notifier for cpu_clk */
>> >> > + notifier_clk = devm_clk_hw_get_clk(dev, &cpu_clk.hw, "dvfs");
>> >> > + if (IS_ERR(notifier_clk))
>> >> > + return dev_err_probe(dev, PTR_ERR(notifier_clk),
>> >> > + "can't get cpu_clk as notifier clock\n");
>> >> > +
>> >> > + ret = devm_clk_notifier_register(dev, notifier_clk,
>> >> > + &a1_cpu_clk_nb_data.nb);
>> >> > + if (ret)
>> >> > + return dev_err_probe(dev, ret,
>> >> > + "can't register cpu_clk notifier\n");
>> >> > +
>> >> > + return ret;
>> >> > +}
>> >> > +
>> >> > +static int meson_a1_cpu_probe(struct platform_device *pdev)
>> >> > +{
>> >> > + struct device *dev = &pdev->dev;
>> >> > + void __iomem *base;
>> >> > + struct regmap *map;
>> >> > + int clkid, i, err;
>> >> > +
>> >> > + base = devm_platform_ioremap_resource(pdev, 0);
>> >> > + if (IS_ERR(base))
>> >> > + return dev_err_probe(dev, PTR_ERR(base),
>> >> > + "can't ioremap resource\n");
>> >> > +
>> >> > + map = devm_regmap_init_mmio(dev, base, &a1_cpu_regmap_cfg);
>> >> > + if (IS_ERR(map))
>> >> > + return dev_err_probe(dev, PTR_ERR(map),
>> >> > + "can't init regmap mmio region\n");
>> >> > +
>> >> > + /* Populate regmap for the regmap backed clocks */
>> >> > + for (i = 0; i < ARRAY_SIZE(a1_cpu_regmaps); i++)
>> >> > + a1_cpu_regmaps[i]->map = map;
>> >> > +
>> >> > + for (clkid = 0; clkid < a1_cpu_clks.num; clkid++) {
>> >> > + err = devm_clk_hw_register(dev, a1_cpu_clks.hws[clkid]);
>> >> > + if (err)
>> >> > + return dev_err_probe(dev, err,
>> >> > + "clock[%d] registration failed\n",
>> >> > + clkid);
>> >> > + }
>> >> > +
>> >> > + err = devm_of_clk_add_hw_provider(dev, meson_clk_hw_get, &a1_cpu_clks);
>> >> > + if (err)
>> >> > + return dev_err_probe(dev, err, "can't add clk hw provider\n");
>> >>
>> >> I wonder if there is a window of opportunity to poke the syspll without
>> >> your notifier here. That being said, the situation would be similar on g12.
>> >>
>> >
>> > Yes, I have taken into account what you did in the G12A CPU clock
>> > relations. My thoughts were that it might not be applicable for the A1
>> > case. This is because the sys_pll should be located in a different
>> > driver from a logical perspective. Consequently, we cannot configure the
>> > sys_pll notifier block to manage the cpu_clk from a different driver.
>> > However, if I were to move the sys_pll clock object to the A1 CPU clock
>> > controller, I believe the g12a sys_pll notifier approach would work.
>> >
>>
>> I fail to see the connection between the number of device and the
>> approach you took.
>>
>>
>> >> > +
>> >> > + return meson_a1_dvfs_setup(pdev);
>> >>
>> >>
>> >>
>> >> > +}
>> >> > +
>> >> > +static const struct of_device_id a1_cpu_clkc_match_table[] = {
>> >> > + { .compatible = "amlogic,a1-cpu-clkc", },
>> >> > + {}
>> >> > +};
>> >> > +MODULE_DEVICE_TABLE(of, a1_cpu_clkc_match_table);
>> >> > +
>> >> > +static struct platform_driver a1_cpu_clkc_driver = {
>> >> > + .probe = meson_a1_cpu_probe,
>> >> > + .driver = {
>> >> > + .name = "a1-cpu-clkc",
>> >> > + .of_match_table = a1_cpu_clkc_match_table,
>> >> > + },
>> >> > +};
>> >> > +
>> >> > +module_platform_driver(a1_cpu_clkc_driver);
>> >> > +MODULE_AUTHOR("Dmitry Rokosov <ddrokosov at salutedevices.com>");
>> >> > +MODULE_LICENSE("GPL");
>> >> > diff --git a/drivers/clk/meson/a1-cpu.h b/drivers/clk/meson/a1-cpu.h
>> >> > new file mode 100644
>> >> > index 000000000000..e9af4117e26f
>> >> > --- /dev/null
>> >> > +++ b/drivers/clk/meson/a1-cpu.h
>> >>
>> >> There is not point putting the definition here in a header
>> >> These are clearly not going to be shared with another driver.
>> >>
>> >> Please drop this file
>> >>
>> >
>> > The same approach was applied to the Peripherals and PLL A1 drivers.
>> > Honestly, I am not a fan of having different file organization within a
>> > single logical code folder.
>> >
>> > Please refer to:
>> >
>> > drivers/clk/meson/a1-peripherals.h
>> > drivers/clk/meson/a1-pll.h
>>
>> I understand. There was a time where it made sense, some definition
>> could have been shared back then. This is no longer the case and it
>> would probably welcome a rework.
>>
>> ... and again, just pointing to another code does really invalidate my
>> point.
>>
>> >
>> >> > @@ -0,0 +1,16 @@
>> >> > +/* SPDX-License-Identifier: GPL-2.0+ */
>> >> > +/*
>> >> > + * Amlogic A1 CPU Clock Controller internals
>> >> > + *
>> >> > + * Copyright (c) 2024, SaluteDevices. All Rights Reserved.
>> >> > + * Author: Dmitry Rokosov <ddrokosov at salutedevices.com>
>> >> > + */
>> >> > +
>> >> > +#ifndef __A1_CPU_H
>> >> > +#define __A1_CPU_H
>> >> > +
>> >> > +/* cpu clock controller register offset */
>> >> > +#define CPUCTRL_CLK_CTRL0 0x80
>> >> > +#define CPUCTRL_CLK_CTRL1 0x84
>> >>
>> >> You are claiming the registers from 0x00 to 0x84 (included), but only
>> >> using these 2 registers ? What is the rest ? Are you sure there is only
>> >> clocks in there ?
>> >>
>> >
>> > Yes, unfortunately, the register map for this IP is not described in the
>> > A1 Datasheet. The only available information about it can be found in
>> > the vendor clock driver, which provides details for only two registers
>> > used to configure the CPU clock.
>> >
>> > From vendor kernel dtsi:
>> >
>> > clkc: clock-controller {
>> > compatible = "amlogic,a1-clkc";
>> > #clock-cells = <1>;
>> > reg = <0x0 0xfe000800 0x0 0x100>,
>> > <0x0 0xfe007c00 0x0 0x21c>,
>> > <0x0 0xfd000000 0x0 0x88>; <==== CPU clock regmap
>> > reg-names = "basic", "pll",
>> > "cpu_clk";
>> > clocks = <&xtal>;
>> > clock-names = "core";
>> > status = "okay";
>> > };
>> >
>> > From vendor clkc driver:
>> >
>> > /*
>> > * CPU clok register offset
>> > * APB_BASE: APB1_BASE_ADDR = 0xfd000000
>> > */
>> >
>> > #define CPUCTRL_CLK_CTRL0 0x80
>> > #define CPUCTRL_CLK_CTRL1 0x84
>>
>> If you had clock in 0x0 and 0x80, then I would agree claiming 0x0-0x88
>> is reasonable, even if you don't really know what is in between. It
>> would be a fair assumption.
>>
>> It is not the case here.
>> For all we know it could resets, power domains, etc ...
>>
>
> However, we do not have any information indicating that the gap from
> 0x00-0x80 contains additional registers. It is possible that there are
> internal registers, but they are not mentioned in the vendor datasheet
> or driver. Therefore, in this case, I personally prefer to rely on the
> vendor mapping.
I understand your preference. My request remains.
--
Jerome
More information about the linux-amlogic
mailing list