[PATCH V2 3/3] arm64: dts: Add pinctrl node for Amlogic T7 SoCs
Huqiang Qin
huqiang.qin at amlogic.com
Thu Sep 21 01:34:08 PDT 2023
Add pinctrl device.
Signed-off-by: Huqiang Qin <huqiang.qin at amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
---
V1 -> V2: Unchanged.
arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index dae3465bd39b..a03c7667d2b6 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -155,6 +155,22 @@ watchdog at 2100 {
clocks = <&xtal>;
};
+ periphs_pinctrl: pinctrl at 4000 {
+ compatible = "amlogic,t7-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank at 4000 {
+ reg = <0x0 0x4000 0x0 0x0064>,
+ <0x0 0x40c0 0x0 0x0220>;
+ reg-names = "mux", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&periphs_pinctrl 0 0 157>;
+ };
+ };
+
uart_a: serial at 78000 {
compatible = "amlogic,t7-uart", "amlogic,meson-s4-uart";
reg = <0x0 0x78000 0x0 0x18>;
--
2.42.0
More information about the linux-amlogic
mailing list