[PATCH net-next v2 09/23] net: stmmac: dwmac-lpc18xx: use devm_stmmac_probe_config_dt()
Jisheng Zhang
jszhang at kernel.org
Sat Sep 16 00:58:15 PDT 2023
Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().
The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().
Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
---
.../ethernet/stmicro/stmmac/dwmac-lpc18xx.c | 21 +++++--------------
1 file changed, 5 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
index d0aa674ce705..dad23b47f383 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-lpc18xx.c
@@ -37,7 +37,7 @@ static int lpc18xx_dwmac_probe(struct platform_device *pdev)
if (ret)
return ret;
- plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+ plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
if (IS_ERR(plat_dat))
return PTR_ERR(plat_dat);
@@ -46,8 +46,7 @@ static int lpc18xx_dwmac_probe(struct platform_device *pdev)
reg = syscon_regmap_lookup_by_compatible("nxp,lpc1850-creg");
if (IS_ERR(reg)) {
dev_err(&pdev->dev, "syscon lookup failed\n");
- ret = PTR_ERR(reg);
- goto err_remove_config_dt;
+ return PTR_ERR(reg);
}
if (plat_dat->mac_interface == PHY_INTERFACE_MODE_MII) {
@@ -56,23 +55,13 @@ static int lpc18xx_dwmac_probe(struct platform_device *pdev)
ethmode = LPC18XX_CREG_CREG6_ETHMODE_RMII;
} else {
dev_err(&pdev->dev, "Only MII and RMII mode supported\n");
- ret = -EINVAL;
- goto err_remove_config_dt;
+ return -EINVAL;
}
regmap_update_bits(reg, LPC18XX_CREG_CREG6,
LPC18XX_CREG_CREG6_ETHMODE_MASK, ethmode);
- ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret)
- goto err_remove_config_dt;
-
- return 0;
-
-err_remove_config_dt:
- stmmac_remove_config_dt(pdev, plat_dat);
-
- return ret;
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
}
static const struct of_device_id lpc18xx_dwmac_match[] = {
@@ -83,7 +72,7 @@ MODULE_DEVICE_TABLE(of, lpc18xx_dwmac_match);
static struct platform_driver lpc18xx_dwmac_driver = {
.probe = lpc18xx_dwmac_probe,
- .remove_new = stmmac_pltfr_remove,
+ .remove_new = stmmac_pltfr_remove_no_dt,
.driver = {
.name = "lpc18xx-dwmac",
.pm = &stmmac_pltfr_pm_ops,
--
2.40.1
More information about the linux-amlogic
mailing list