[PATCH net-next v2 06/23] net: stmmac: dwmac-ingenic: use devm_stmmac_probe_config_dt()

Jisheng Zhang jszhang at kernel.org
Sat Sep 16 00:58:12 PDT 2023


Simplify the driver's probe() function by using the devres
variant of stmmac_probe_config_dt().

The remove_new() callback now needs to be switched to
stmmac_pltfr_remove_no_dt().

Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
---
 .../ethernet/stmicro/stmmac/dwmac-ingenic.c   | 35 ++++++-------------
 1 file changed, 10 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
index 0a20c3d24722..3f87053ffc07 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ingenic.c
@@ -241,29 +241,25 @@ static int ingenic_mac_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 	if (IS_ERR(plat_dat))
 		return PTR_ERR(plat_dat);
 
 	mac = devm_kzalloc(&pdev->dev, sizeof(*mac), GFP_KERNEL);
-	if (!mac) {
-		ret = -ENOMEM;
-		goto err_remove_config_dt;
-	}
+	if (!mac)
+		return -ENOMEM;
 
 	data = of_device_get_match_data(&pdev->dev);
 	if (!data) {
 		dev_err(&pdev->dev, "No of match data provided\n");
-		ret = -EINVAL;
-		goto err_remove_config_dt;
+		return -EINVAL;
 	}
 
 	/* Get MAC PHY control register */
 	mac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "mode-reg");
 	if (IS_ERR(mac->regmap)) {
 		dev_err(&pdev->dev, "%s: Failed to get syscon regmap\n", __func__);
-		ret = PTR_ERR(mac->regmap);
-		goto err_remove_config_dt;
+		return PTR_ERR(mac->regmap);
 	}
 
 	if (!of_property_read_u32(pdev->dev.of_node, "tx-clk-delay-ps", &tx_delay_ps)) {
@@ -272,8 +268,7 @@ static int ingenic_mac_probe(struct platform_device *pdev)
 			mac->tx_delay = tx_delay_ps * 1000;
 		} else {
 			dev_err(&pdev->dev, "Invalid TX clock delay: %dps\n", tx_delay_ps);
-			ret = -EINVAL;
-			goto err_remove_config_dt;
+			return -EINVAL;
 		}
 	}
 
@@ -283,8 +278,7 @@ static int ingenic_mac_probe(struct platform_device *pdev)
 			mac->rx_delay = rx_delay_ps * 1000;
 		} else {
 			dev_err(&pdev->dev, "Invalid RX clock delay: %dps\n", rx_delay_ps);
-			ret = -EINVAL;
-			goto err_remove_config_dt;
+			return -EINVAL;
 		}
 	}
 
@@ -295,18 +289,9 @@ static int ingenic_mac_probe(struct platform_device *pdev)
 
 	ret = ingenic_mac_init(plat_dat);
 	if (ret)
-		goto err_remove_config_dt;
-
-	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-	if (ret)
-		goto err_remove_config_dt;
-
-	return 0;
-
-err_remove_config_dt:
-	stmmac_remove_config_dt(pdev, plat_dat);
+		return ret;
 
-	return ret;
+	return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -385,7 +370,7 @@ MODULE_DEVICE_TABLE(of, ingenic_mac_of_matches);
 
 static struct platform_driver ingenic_mac_driver = {
 	.probe		= ingenic_mac_probe,
-	.remove_new	= stmmac_pltfr_remove,
+	.remove_new	= stmmac_pltfr_remove_no_dt,
 	.driver		= {
 		.name	= "ingenic-mac",
 		.pm		= pm_ptr(&ingenic_mac_pm_ops),
-- 
2.40.1




More information about the linux-amlogic mailing list